YSP-3000/YSP-30D/HTY-7030
41
YSP-3000/YSP-30D/
HTY-7030
HARD FLOW Hard Flow
7. RS-232C
Not applied to these models.
7. RS-232C
TxD/RxD DATA TxD/RxD Data
6. MANUAL TEST
The noise generator with a built-in DSP outputs the
test noise through the channels specified by the sub-
menu.
The noise frequency is 30 to 80Hz for LFE but 500 to
2kHz for others.
6. MANUAL TEST
7. TxRxData:NG
7. HardFlow:NG
TEST ALL TEST FRONT L TEST CENTER
TEST FRONT R TEST SURROUND R TEST SURROUND L
TEST LFE
6.TEST ALL
6.TEST FRNT R
6.TEST LFE
6.TEST FRNT L
6.TEST SURR R
6.TEST CENTER
6.TEST SURR L
Noise is output from all channels.
Noise is output from the FRONT L channel.
Noise is output from the CENTER channel.
Noise is output from the FRONT R channel.
Noise is output from the SURROUND R channel.
Noise is output from the SURROUND L channel.
Noise is output from the SUBWOOFER channel.
8. FACTORY PRESET
This menu is used to reserve and inhibit initialization of
the back-up RAM.
PRESET INHIBIT (Initialization inhibited) /
RAM initialization is not executed. Select this sub-menu to protect the values set by the
user.
PRESET RESERVED (Initialization reserved) /
Initialization of the back-up RAM is reserved. (Actually, initialization is executed the next
time that the power is turned on.) Select this sub-menu to reset to the original factory
settings or to reset the RAM. Any protection history will be cleared.
8. FACTORY PRESET
8. PRESET INHI
8. PRESET RSRV
Comments to this Manuals