Yamaha YRS-700 Owner's Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
Troubleshooting
25 En
PREPARATION
CONNECTION/
INITIAL SETTINGS PLAYBACK SETTINGS
TROUBLESHOOTING
ABOUT THIS UNIT English
The image is not
displayed on TV screen.
HDMI cable or video pin cable is not
securely connected.
Connect them with an HDMI connection or a
digital connection.
6, 7
The input switch of TV is not set correctly. Switch the input source for your TV.
A digital or high-
frequency equipment
produces noises.
The unit may be placed close to digital
equipment or high-frequency equipment.
Leave these equipments from the unit.
The system settings
change automatically.
When “HDMI Ctrl” is set to “On”,
operations of the TV (for example,
changing channels, etc.) may change the
system settings, such as the surround mode.
Set “HDMI Ctrl” to “Off” or set the system again
by using its remote control.
21
The HDMI control
function does not work
properly.
“HDMI Ctrl” is set to “Off”. Set “HDMI Ctrl” to “On”. 21
The HDMI control function is disabled on
your TV.
Refer to the manual supplied with your TV and
check the setting.
The number of the connected HDMI
components is over the limit.
Disconnect some of the HDMI components.
The automatic lipsync
is not effective even
“Lip Sync” is set to
“On”.
The TV does not support the automatic
lipsync.
Set “Lip Sync” to “Off” and then manually adjust
the audio output delay.
19
“Not Available” appears
on the front panel
display after key
operation.
The key is unable to function in the current
condition.
Remote control
Problem Cause Remedy
See
page
The remote control
does not work and/or
function properly.
Wrong distance or angle. The remote control functions within a maximum
range of 6 m (20 ft) and no more than 30 degrees
off-axis from the front panel.
5
Direct sunlight or lighting (from an inverter
type of fluorescent lamp, etc.) is striking
the remote control sensor of this unit.
Reposition this unit.
The batteries are weak. Replace all batteries. 5
Problem Cause Remedy
See
page
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 73 74

Comments to this Manuals

No comments