Yamaha YRS-700 Owner's Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
13 En
Playback features
PREPARATION
CONNECTION/
INITIAL SETTINGS SETTINGS
TROUBLESHOOTING
ABOUT THIS UNIT EnglishPLAYBACK
Set according to each input (TV/HDMI1-3/INPUT1-3/DOCK).
Available menu items vary depending on the selected input.
Option menu items
The following menu items are provided for each input.
The option menu items are listed below. These settings are
applied to the currently selected input source. The default settings
are marked with “*”.
Adjusting input level of each jack
(Volume Trim)
Adjust the input level for each jack to compensate for variations
in volume between different input devices.
Adjustable range: -6.0 dB to 0.0 dB* to +6.0 dB
Switching the audio signal to play back
(Decoder Mode)
Select digital audio signals for playback.
Selectable item: Auto*, DTS
Auto: This unit automatically selects the audio signal for
playback. Normally select this mode.
DTS: This unit plays back only DTS signal.
Displaying the input signal information
(Signal Info)
Press U/ V to change the following informations.
Settings for each input source (Option menu)
1
Press input key ( , , , ) to select
the input you want to change the setting.
2
Press OPTION key.
The option menu is displayed on the front panel display.
3
Select the items by pressing U/ V
key, then press ENTER key.
4
Change setting value by pressing Y/Z
key.
5
To exit the option menu, press OPTION
key.
Input source Menu items
HDMI1-3 Volume Trim, Decoder Mode, Signal Info
TV
INPUT1-3
DOCK
Volume Trim, Connect, Disconnect, Pairing,
Interlock
4)
; Volume Trim
Format Digital audio format
Channel The number of channels included in input signal
(front/surround/LFE (low frequency sound
effects))
Display example: [3/2/0.1] Front 3ch,
Surround 2ch, LFE for input signal
5)
Sampling Sampling frequency for digital input signal
Bitrate Bitrate per second of input signal
HDMI In HDMI video signal resolution
HDMI Message When error occurs with HDMI (displayed only
when error is occurred.)
For details, on Interlock, refer to “Playing back iPod/iPhone (p. 14)”.
For details on Connect, Disconnect and Pairing, refer to “Playing back
Bluetooth components (p. 16)”.
If the input signal includes channels that cannot be displayed in the
format shown in the display example, the total number of channels will
be displayed, as in “5.1ch”.
4) y
5) y
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 73 74

Comments to this Manuals

No comments