Yamaha YRS-700 Owner's Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 74
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
23 En
PREPARATION
CONNECTION/
INITIAL SETTINGS PLAYBACK
TROUBLESHOOTING
ABOUT THIS UNIT EnglishSETTINGS
Advanced setup
1
Press key to turn this unit to
standby mode.
2
While holding down INPUT key on the front
panel, press key on the remote
control to turn on the power.
“ADVANCED SETUP” appears in the front panel
display.
3
Release INPUT key on the front panel.
4
Press U/ V to select the desired
menu on the front panel display and then
press ENTER key.
1)
5
Change setting by pressing Y/Z key.
2)
6
Press key to set this unit to the
standby mode.
The new setting will be reflected when you turn on the
unit by pressing key.
Menu Description Selectable item/ Adjustable range
TURN ON VOLUME Sets volume level at power-on. Off* (Not set), 01 to 99, MAX (Maximum)
MAX VOLUME SET Sets maximum volume. 01 to 99, MAX* (Maximum)
PANEL INP. KEY Enables/disables the INPUT key on the front panel. P.INPUT: ON* (Enabled), P.INPUT: OFF
(Disabled)
F.PANEL. KEY Enables/disables the keys on the front panel. P.INPUT: ON* (Enabled), P.INPUT: OFF
(Disabled)
R.INPUT POWER Enables/disables power-on by remote control input
keys when the unit is in standby mode.
R.INPUT PW: OFF* (Disables power-on),
R.INPUT PW: ON (Enables power-on)
AC ON STANDBY Sets whether or not this unit returns to its previous
state when AC power is restored after a temporary
power loss.
AC STANDBY: OFF* (Restores the state before
power was lost),
AC STANDBY: ON (Enters standby mode)
FACTORY PRESET Resets all settings to their default values, except
settings in ADVANCED SETUP.
PRST: CANCEL* (Reset is not performed),
PRST: RESET (Reset is performed)
To return to the previous menu, press RETURN key.
The default settings are marked with “*”.
1) y
2) y
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 73 74

Comments to this Manuals

No comments