Yamaha R-N602 Owner's Manual download pdf (Page 56)

52 En

Troubleshooting

Only the speaker on

one side can be

heard.

Incorrect cable connections. Connect the cables properly. If the problem persists,

the cables may be defective.

Incorrect setting for the speaker balance. Set the BALANCE control to the appropriate

position.

There is a lack of bass

and no ambience.

The + and – wires are connected in

reverse at the amplifier or the speakers.

Connect the speaker wires to the correct + and –

phase.

A “humming” sound

can be heard.

Incorrect cable connections. Connect the audio plugs firmly. If the problem

persists, the cables may be defective.

No connection from the turntable to the

GND terminal.

Make the GND connection between the turntable and

this unit.

The volume level is

low while playing a

record.

The record is being played on a turntable

with an MC cartridge.

The turntable should be connected to this unit through

the MC head amplifier.

—

The sound is

degraded when

listening with the

headphones

connected to the CD

player or the tape

deck connected to

this unit.

The power of this unit is turned off, or this

unit is set to standby mode.

Turn on the power of this unit.

—

The sound level is

low.

The loudness control function is

operating.

Turn down the volume, set the LOUDNESS control

to the FLAT position, and then adjust the volume

again.

Problem Cause Remedy

See

page

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 65 66

Comments to this Manuals

No comments

Yamaha R-N602 Owner's Manual Page 56

Comments to this Manuals

Related products and manuals for Car media receivers Yamaha R-N602