Yamaha RX-V1071 Owner's Manual download pdf (Page 75)

En 75

The multi-zone function allows you to play back separate input

sources in the room where this unit is installed (main zone) and

another room (Zone2).

For example, while you are watching a TV in the living room (main

zone), another person can listen to radio in the bedroom (Zone2).

• Since there are many possible ways to use this unit in a multi-zone configuration,

we recommend that you consult with your nearest authorized Yamaha dealer or

service center about the multi-zone connections that best meet your

requirements.

• Only analog audio signals (including radio, USB and network sources) can be

output to Zone2. To listen to playback sounds of an external device in Zone2, you

need to connect the device to the AUDIO jacks of this unit with a stereo pin cable.

The party mode (p.79) allows you to enjoy main zone sources in Zone2

simultaneously regardless of input audio signal types.

Preparing for Zone2

Connect devices to be set in Zone2 to this unit. The connection

method varies depending on an amplifier to use (this unit or

external amplifier).

■ Using the internal amplifier of this unit

Connect the speakers placed in Zone2 to this unit with speaker

cables. For details, see “Connecting Zone2 speakers” (p.22).

Playing back music in multiple rooms (multi-zone)

Living room (main zone)

Bedroom (Zone2)

Caution

• Remove the power cable of this unit from an AC wall outlet before connecting

speakers or an external amplifier.

• Be careful that the core of the speaker cable does not touch anything or come

into contact with the metal areas of this unit. This may damage this unit or the

speakers. If the speaker cables short circuit, “CHECK SP WIRES” will appear

on the front display when this unit is turned on.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 137 138

No comments

Yamaha RX-V1071 Owner's Manual Page 75