Yamaha RX-V1071 Owner's Manual Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 138
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
En 106
Multi Zone
Configures the multi zone settings.
Zone2 Set
Configures the audio output settings for Zone2.
Volume
Enables/disables volume adjustments for Zone2 output.
Settings
This setting is available only when Zone2 speakers are connected to this unit via an external amplifier
(p.76).
Max Volume
Sets the Zone2 maximum volume so that sound is not too loud.
Setting range
-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB
Default
+16.5dB
Initial Volume
Sets the Zone2 initial volume for when this unit is turned on.
Settings
Mono
Switches between stereo and monaural for Zone2 output.
Settings
Monitor Out Assign
Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO, S
VIDEO and VIDEO) jacks are used.
Settings
Main (default), Zone2
The video conversion between the analog video jacks does not work for Zone2 video output. To watch
videos played back on a video device on the Zone2 video monitor, you need to connect the video monitor to
this unit in the same way as the video device.
Party Mode Set
Enables/disables switching to the party mode (p.79).
Choice
Target: Zone 2
Settings
Zone Scene Rename
Changes the scene names (for Zone2) displayed on the front display or TV screen.
Setup procedure
1
While “Zone2” is selected, press ENTER.
2
Use the cursor keys to select a scene to be renamed and press ENTER.
Fixed Disables volume adjustments for Zone2 output.
Variable (default) Enables volume adjustments for Zone2 output.
Off (default) Sets at the level when this unit last entered standby mode.
On
Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps).
(This setting works only when “Max Volume” is set higher.)
Off (default) Produces stereo sounds in Zone2.
On Produces monaural sounds in Zone2.
Disable Disables switching to the party mode.
Enable (default)
Enables switching to the party mode. You can turn on/off the party
mode by pressing PARTY on the remote control.
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 137 138

Comments to this Manuals

No comments