Yamaha RX-A710 Manual download pdf (Page 97)

En 97

Multi Zone

Configures the multi zone settings.

■ Zone2 Set

Configures the audio output settings for Zone2.

• The “Zone2 Set” settings are available only when “Power Amp Assign” (p.90) is set to “7ch+1ZONE”

❑ Max Volume

Sets the Zone2 maximum volume so that sound is not too loud.

Setting range

-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB

Default

+16.5dB

❑ Initial Volume

Sets the Zone2 initial volume for when this unit is turned on.

Settings

■ Zone Rename

Changes the zone names displayed on the TV screen.

■ Setup procedure

Use the cursor keys to select a zone to be renamed and press ENTER.

Press ENTER, use the cursor keys to rename, and then press ENTER again.

Use the cursor keys to select “OK” and press ENTER.

• To clear the entry, select “CLEAR”.

To exit from the menu, press ON SCREEN.

Function

Configures the functions that make this unit easier to use.

■ Auto Power Down

Sets the amount of time for auto-standby. If you do not operate this unit for the specified

time, this unit will automatically go into standby mode.

Settings

Off (default) Sets at the level when this unit last entered standby mode.

Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps).

(This setting works only when “Max Volume” is set higher.)

Off (default) Does not set this unit to standby mode automatically.

4 Hours, 8 Hours,

12 Hours

Sets this unit to standby mode when you have not operated this unit for the

specified time.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 140 141

No comments

Yamaha RX-A710 Manual Page 97