Yamaha RX-A710 Manual Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 141
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
En 102
ADVANCED SETUP menu items
Changing the speaker impedance setting (SP IMP.)
Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.
Settings
Selecting the remote control ID (REMOTE ID)
Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
1
Press CODE SET on the remote control using a pointed object such as the tip of a
ballpoint pen.
2
Press SOURCE/RECEIVER.
3
Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 1.
The registered remote control codes (p.104) are not cleared even if you change the remote control ID.
Resetting the Parental Lock code number (SR LOCK)
Reset the Parental Lock code number for SIRIUS Satellite Radio.
Choices
Switching the video signal type (TV FORMAT)
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC (default), PAL
Item Function Page
SP IMP. Changes the speaker impedance setting. 102
REMOTE ID Selects the remote control ID of the main unit. 102
SR LOCK
Resets the Parental Lock code number for SIRIUS
Satellite Radio.
102
TV FORMAT Switches the video signal type. 102
MON.CHK Removes the limitation on HDMI video output. 103
INIT Restores the default settings. 103
UPDATE Updates the firmware. 103
VERSION
Checks the version of firmware currently installed on
this unit.
103
6 Ω MIN
Select this when you connect 6-ohm speakers to this unit. You can also
use 4-ohm speakers as the front speakers.
8 Ω MIN (default) Select this when you connect 8-ohm or higher speakers to this unit.
SPIMP.-8MIN
REMOTEID-ID1
RESET Resets the Parental Lock code number.
CANCEL Does not perform a reset.
SIRIUS
VOL.
SW
C
LR
SL SR
MUTE
PR
PL
SBL SB SBR
SRXLOCK-CANCEL
TVFORMAT-NTSC
Page view 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 140 141

Comments to this Manuals

No comments