Yamaha HTR-4063 Manual download pdf (Page 61)

En 61

SETUP

Setting sound field program parameters

Parameters usable in surround decoder

Dolby PLIIx Music and Dolby PLII Music only

Adjusts the soundscape of the front sound field. Sends front left/

right channels sounds to the surround speakers as well as the front

speakers for a wraparound effect.

Spreads the center channel sound to the front left and right

speakers to suit your needs or preferences. Set this parameter to 0

for outputting the center sound from the center speaker only, or to 7

for outputting it from the front left/right speaker only.

Adjusts the difference in level between the front sound field and

the surround sound field. You can adjust the difference in level

created by the software being played back to obtain the preferred

sound balance.

The surround sound gets stronger as you make the value more

negative, and the front sound gets stronger as you make the value

more positive.

When Neo:6 Music is selected

Adjusts the front left and right channel output relative to the center

channel to make the center channel more or less dominant as

necessary.

Panorama

Off (Default) Disables the effect.

On Enables the effect.

CT Width

Adjustable range 0 to 7

Default setting 3

Dimension

Adjustable range -3 to STD to +3

Default setting STD (Standard)

C.Image

Adjustable range 0.0 to 1.0

Default setting 0.3

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 96 97

No comments

Yamaha HTR-4063 Manual Page 61