Yamaha DG-1000 Operations Instructions download pdf (Page 78)

78

GB

Adjusting the speaker

levels and balance

(TEST TONE)

You can adjust the speaker levels and balance

while listening the test tone from your

listening position.

Tip

The receiver employs a test tone with a frequency

centered at 800 Hz.

1 Turn on the receiver and TV.

2 Press ON SCREEN.

Switch the input of the TV so that the

setting menu is displayed on the TV

screen connected to this receiver.

3 Press RECEIVER.

Receiver operation is enabled.

4 Press MENU.

The list of setting menus appears.

5 Press V/v repeatedly to select

“Level Settings,” then press

to enter.

6 Press V/v repeatedly to select

“TEST TONE,” then press .

7 Press V.

The test tone is output from each speaker

in sequence.

Also, if you press v, the pattern will

become the “FIX” pattern in which the

test tone is output from the selected

speaker only.

8 Press to enter.

9 Adjust the speaker level and

balance using the Level

Settings menu so that the level

of the test tone sounds the

same from each speaker.

For details on the Level Settings menu,

see page 58.

Tips

• To adjust the level of all speakers at the same

time, press MASTER VOL +/–.

• The adjusted value is shown on the display

during adjustment.

10Press V/v repeatedly to select

“TEST TONE,” then press .

11Press v to select “OFF,” then

press .

The test tone turns off.

12Press ON SCREEN.

The menu setting display disappears.

2,

12

1

5-11

3

4

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 122 123

Comments to this Manuals

No comments