Yamaha DG-1000 Operations Instructions download pdf (Page 101)

101

Other Operations

To operate the receiver using an

IR repeater

You can operate the receiver without pointing

the remote toward the IR sensor of the receiver

if you use an IR repeater.

Use an IR repeater when you install the

receiver in a place where signals from the

remote cannot reach.

Using a bi-amplifier

connection

If you are not using surround back speakers,

you can use the SURROUND BACK

SPEAKERS terminals for the front speakers

for use with a bi-amplifier connection.

To connect speakers

Connect the terminals on the Lo (or Hi) side of

the front speakers to the FRONT SPEAKERS

A terminals, and connect the terminals on the

Hi (or Lo) side of the front speakers to the

SURROUND BACK SPEAKERS terminals.

Make sure that metal fittings of Hi/Lo attached

to the speakers have been removed from the

speakers. Not doing so may cause a

malfunction of the receiver.

To set up speakers

Set “SUR BACK SP” to “BI-AMP” in the

Speaker Settings menu (page 67). The same

signals output from the FRONT SPEAKERS

A terminals can be output from the

SURROUND BACK SPEAKERS terminals.

IR repeater

(not supplied)

STR-DG1000

RM-AAL003

Front speaker

(R)

Front speaker

(L)

continued

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 122 123

No comments

Yamaha DG-1000 Operations Instructions Page 101