Yamaha DG-1000 Operations Instructions download pdf (Page 108)

108

1 Press MACRO 1 or MACRO 2 for

more than 1 second while

pressing RM SET UP.

The RM SET UP button flashes twice.

2 Press the input button of the

component that you want to

assign one of the following

operations.

The selected input button lights up.

3 Press the button for the

operation you want to perform

to learn the function as follows.

The input button selected in step 2 flashes

twice, then lights up again.

4 Repeat steps 2 and 3. When you

want to assign another

command for the same

component, repeat step 3.

5 Press RM SET UP to finish the

programming process.

Tip

If the RM SET UP button flashes five times in step

1, and the macro programming process does not

start, replace the batteries with new ones.

To cancel programming

Press RM SET UP. Also, not pressing any

button for 60 seconds cancels the settings.

The previous command remainds valid.

Program the sequence of the

operation

1,5

1,3

2,3

Press Operations to be

programmed

H, x, X,

M, m,

., >

Performs the operation

of the button.

The input

button for more

than 1 second

Switches inputs.

MACRO 1 or

MACRO 2

Make a one second

interval. When you want

to make a longer

interval, press MACRO

1 or MACRO 2

repeatedly.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 122 123

Comments to this Manuals

No comments

Yamaha DG-1000 Operations Instructions Page 108

Comments to this Manuals

Related products and manuals for AV receivers Yamaha DG-1000