Yamaha RX-V667 Manual

Owner’s ManualAV Receiver English for Europe, Asia, Africa,Oceania and Latin America

INTRODUCTIONPart names and functions En 10Front panel displaya HDMI indicatorLights up during normal HDMI communication when any of the HDMI1-5 inputs

SETUP En 100This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sou

SETUPUsing multi-zone configuration En 101Controlling Zone2The remote control can be used to select and control Zone2 devices. The available operation

En 102APPENDIXRefer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the

En 103APPENDIXTroubleshootingNo picture. The video signal output from this unit is not supported by a monitor connected to this unit via the HDMI OUT

En 104APPENDIXTroubleshootingHDMI™The audio input sources cannot be played in the desired digital audio signal format.The connected component is not

En 105APPENDIXTroubleshootingTuner (FM/AM)FMAMProblem Cause RemedySee pageFM stereo reception is noisy.You are too far from the station transmitter,

En 106APPENDIXTroubleshootingiPod™/iPhone™ Bluetooth™Display Cause RemedySee pageLoading... The unit is in the process of recognizing the connection

En 107APPENDIXTroubleshootingRemote controlProblem Cause RemedySee pageThe remote control does not work or function properly.Wrong distance or angle.

APPENDIX En 108Audio informationAudio and video synchronization (Lipsync)Lip sync, an abbreviation for lip synchronization, is a technical term that i

APPENDIXGlossary En 109DSDDirect Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, si

INTRODUCTIONPart names and functions En 11Remote controla Remote control signal transmitterTransmits infrared signals.b MAIN/ZONE2Switches the zone to

APPENDIXGlossary En 110S-video signalWith the S-video signal system, the video signal normally transmitted using a pin cable is separated and transmit

APPENDIX En 111 HDMI signal compatibilityAudio signals• If the input source component can decode the bitstream audio signals of audio commentaries, y

APPENDIX En 112 Input jacks• Analog audio[U.S.A. and Canada models]Audio x 5 (AV5, AV6, AUDIO1, AUDIO2, V-AUX)MULTI CH INPUT x 1 (8ch Input)[Others m

APPENDIXSpecifications En 113• Input Sensitivity/Input Impedance[U.S.A. and Canada models]AV5, etc. ...

APPENDIX En 114Numerics5 channel speaker layout... 155.1-channel speaker layout...

APPENDIXIndex En 115Load, SCENE menu... 72Low-frequency sound adjustment...

APPENDIXIndex En 116YYPAO... 33ZZone2 Set, Multi Zone ...

© 2010 Yamaha CorporationYC513D0/OMEN3

- 1 -TVA.R. Systems 0320Acme 0342Acura 0323, 0343ADC 0337Admiral 0054, 0178, 0336, 0337, 0339, 0346, 0347Advent 0158Adventura 0057Adyson 0277, 0282, 0

- 2 -Genexxa 0320, 0340, 0347, 0350GFM 0128, 0227Giant 0282Gibralter 0008, 0030, 0050, 0062GoldHand 0277Goldline 0320GoldStar 0007, 0008, 0012, 0026,

INTRODUCTIONPart names and functions En 12On-screen displayWhen a TV is connected to this unit, the supplied remote control can be used to specify and

- 3 -0239, 0256, 0257, 0259, 0261, 0263, 0267, 0280, 0281, 0287, 0296, 0299, 0301, 0303, 0305, 0313, 0319, 0320, 0324, 0333, 0339, 0342, 0349, 0350, 0

- 4 -Yamaha 0008, 0026, 0050, 0053, 0080, 0081, 0082, 0083, 0086, 0087Yamishi 0282, 0320Yok an 0 32 0Yoko 0161, 0277, 0282, 0320, 0323, 0337, 0340, 03

- 5 -Sinudyne 1028Solavox 1030Sonic Blue 1022, 1123Sonneclair 1008Sonoko 1009, 1025Sontec 1031Sony 1001, 1016, 1048, 1053, 1073, 1074, 1080, 1081, 108

- 6 -2309, 2310, 2311, 2344, 2345, 2347, 2379Pointer 2362Polaroid 2125, 2215, 2235Portland 2362Powerpoint 2363Prima 2252Proceed 2130Proscan 2156Proson

- 7 -Tocom 3067Torx 3017Toshiba 3122Tristar 3127Tudi 3102Tusa 3072, 3123TV86 3077Unika 3065, 3070United Cable 3018, 3119Universal 3065, 3070Universum

- 8 -Quadral 4024, 4007, 4005, 4008, 4216Quelle 4015, 4215, 4219Quiero 4052RadioShack 4019Radiola 4055, 4053Radix 4014, 4037Rainbow 4004RCA 4093, 4066

En 13CONNECTIONSThis unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effec

CONNECTIONSConnecting speakers En 14Speaker layout Enjoying the 7.1 channel audio source 7.1-channel speaker layout (7 speakers + subwoofer) Connect

CONNECTIONSConnecting speakers En 15 Enjoying the 7.1 channel audio source without surround back speakers 5.1-channel speaker layout (5 speakers + su

CONNECTIONSConnecting speakers En 16 Using speakers in two rooms (Zone2 function) 7.1-channel speaker layout + Zone2(7 speakers (in main zone) + subw

CONNECTIONSConnecting speakers En 17Connecting speakers and subwooferConnect your speakers to their respective terminals on the rear panel. Front/Cen

CONNECTIONSConnecting speakers En 18 Bi-amp connectionThis unit can be connected to speakers that support bi-amp connections. When connecting speaker

CONNECTIONSConnecting speakers En 193Check that “SP IMP.” is displayed on the front panel.4Press STRAIGHT repeatedly to select a “6ΩMIN.”5Switch this

En 2CONTENTSINTRODUCTIONFeatures and capabilities ...4Using the TV OSD to operate the unit ...

CONNECTIONSConnecting speakers En 20 Connecting the subwoofer1Connect the subwoofer input jack to the SUBWOOFER 1 or 2 jack on this unit with an audio

CONNECTIONS En 21Cable plugs and jacksThis unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components tha

CONNECTIONSConnecting external components En 22Connecting a TV monitorThis unit is equipped with the following three types of output jack for connecti

CONNECTIONSConnecting external components En 23 Connecting an HDMI video monitorConnect the HDMI cable to the HDMI OUT jack. Connecting a component vi

CONNECTIONSConnecting external components En 24 Listening to TV audioTo transmit sound from the TV to this unit, connect as followings according to t

CONNECTIONSConnecting external components En 25Connecting BD/DVD players and other devicesThis unit has the following input jacks. Connect them to the

CONNECTIONSConnecting external components En 26 Connecting BD/DVD players and other devices with component video cablesConnect the device with a compo

CONNECTIONSConnecting external components En 27 Connecting BD/DVD players and other devices with S-video cables (U.K. and Europe models only)Connect t

CONNECTIONSConnecting external components En 28 Connecting CD players and other audio devicesUsing analog stereo output sourcesSelect the audio input

CONNECTIONSConnecting external components En 29Connecting game consolesUse the VIDEO AUX jacks on the front panel to temporarily connect devices such

En 3SETUPConfiguring input sources (Input menu) ...67Configuring input sources ...67In

CONNECTIONSConnecting external components En 30Connecting an external amplifierThe same channel signals are output from the jacks of the PRE OUT termi

CONNECTIONSConnecting external components En 31Using the Trigger function to link external component powerWhen this unit is connected to a Yamaha subw

CONNECTIONS En 32An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas properly to their respective jack

CONNECTIONS En 33This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) that adjusts the status, size, and volume balance of th

CONNECTIONSSetting up the speaker parameters automatically (YPAO) En 344Connect the YPAO microphone to the YPAO MIC jack on the front panel.“Mic On. V

CONNECTIONSSetting up the speaker parameters automatically (YPAO) En 356Press kCursor B / C to select “Save/Exit” and press kENTER.7Press kCursor D /

CONNECTIONSSetting up the speaker parameters automatically (YPAO) En 36 Reviewing and reloading automatic setup parametersThe results of automatic aco

CONNECTIONSSetting up the speaker parameters automatically (YPAO) En 37 When an error message is displayed during measurementSee “Error messages” (☞p.

CONNECTIONSSetting up the speaker parameters automatically (YPAO) En 38 Message list When a warning message is displayed before measurement Error me

CONNECTIONSSetting up the speaker parameters automatically (YPAO) En 39 Warning messagesW-1:Out of PhaseThe speakers displayed are connected with the

En 4INTRODUCTION Built-in high-quality, high-power 7-channel amplifier 6 HDMI input jacks (5 + 1 VIDEO AUX) supporting Audio Return Channel and 3D

En 40PLAYBACK1Turn on external components (TV, DVD player, etc.) connected to this unit.2Use the dInput selector to select the input source.The name

PLAYBACK En 41This unit has a SCENE function that allows you switch this unit on and change input sources and sound programs with one key.Four scenes

PLAYBACKEnjoying the desired sound field effect En 42Selecting sound program (☞p. 45): MOVIE category: Press gMOVIE repeatedlyMUSIC category: Press gM

PLAYBACKEnjoying the desired sound field effect En 43 Enjoying sound programs without surround sound speakersThis unit allows you to use virtual surro

PLAYBACKEnjoying the desired sound field effect En 44 Enjoying Hi-Fi Sound Quality (Pure Direct mode)Use Pure Direct mode to enjoy the pure high fidel

PLAYBACKEnjoying the desired sound field effect En 45Sound programs Category: MOVIESound programs optimized for viewing video sources such as movies,

PLAYBACKEnjoying the desired sound field effect En 46 Category: MUSICThis sound field is suitable when listening to music sources such as CDs. Catego

PLAYBACK En 47This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. With the OSD,

PLAYBACKConfiguring the settings of this unit while viewing the TV screen En 48 Selecting a scene1Use kCursor B / C to select “Scene” and press kENTER

PLAYBACK En 49This unit has a unique OPTION menu for each input source. OPTION menus can be used to enable features such as volume trim for compatible

INTRODUCTION En 5This unit features a sophisticated on-screen display (OSD) for the TV screen. The OSD is designed to enable visual guidance that simp

PLAYBACKConfiguring settings specific to an individual input source (OPTION menu) En 50OPTION menuThe following items are provided for each input sour

PLAYBACKConfiguring settings specific to an individual input source (OPTION menu) En 51 Auto-adjusting the sound level to make even low volumes more a

PLAYBACKConfiguring settings specific to an individual input source (OPTION menu) En 52 Adjusting volume between input sourcesVolume TrimInput source:

PLAYBACK En 53When DOCK or TUNER is selected, the Content window is displayed on the TV screen. Playback style for iPod and functions for FM/AM tuner

PLAYBACK En 54Selecting a frequency for reception (Normal tuning)1Press dTUNER to switch to the tuner input.2Press eFM or eAM to select a band to rece

PLAYBACKFM/AM tuning En 553Use eTUNING H / I to set a frequency to receive. eTUNING H Increases the frequency. Press and hold this key for longer than

PLAYBACKFM/AM tuning En 56Radio Data System tuning (U.K. and Europe models only)Radio Data System is a data transmission system used by FM stations in

PLAYBACKFM/AM tuning En 57 Automatic traffic information reception (U.K. and Europe models only)When the tuner is active, this unit can automatically

PLAYBACKFM/AM tuning En 58Confirming and operating the FM/AM tuner from the Content windowThe station currently received can be confirmed from the men

PLAYBACKFM/AM tuning En 59 Operating from the Content browse viewa Preset station listThe list of preset stations is displayed.b Screen button areaBut

INTRODUCTIONUsing the TV OSD to operate the unit En 6 HDMI settings– Assign the audio input source for the TV <TV Audio Input>...

PLAYBACK En 60Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your

PLAYBACKPlaying back tunes from your iPod™/iPhone™ En 61Playing iPod/iPhone from the menu screen (Menu browse control)The iPod/iPhone can be operated

PLAYBACKPlaying back tunes from your iPod™/iPhone™ En 62Play ControlOperates the basic playback functions of iPod/iPhone.ScrollSwitches the scroll tar

PLAYBACKPlaying back tunes from your iPod™/iPhone™ En 63Operating basic playback functions via the remote control (Simple remote control)Use the follo

PLAYBACKPlaying back tunes from your iPod™/iPhone™ En 64Use iPod/iPhone to start playback.• This unit, which is placed in the main zone, functions as

PLAYBACK En 65You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playbac

PLAYBACKPlaying back tunes from Bluetooth™ components En 665Make sure the Bluetooth component recognizes the Bluetooth wireless audio receiver.When th

En 67SETUPSettings, such as the name of an input source or the icon displayed for an input source can be changed from the Input menu.Configuring inpu

SETUPConfiguring input sources (Input menu) En 68Input menu Changing an input source name or iconRename/Icon SelectInput source: HDMI1-5, AV1-6, AUDIO

SETUPConfiguring input sources (Input menu) En 69 Combining HDMI/AV1-2 input source video and audioAudio InInput source: HDMI1-5, AV1-2Combines video

INTRODUCTIONUsing the TV OSD to operate the unit En 7About this manualSupplied accessoriesCheck that you received all of the following parts.• Remote

En 70SETUPConfiguring input sources (Input menu) Setting the interlock functions with iPod/iPhone (when a Yamaha iPod wireless receiver is connected)

SETUP En 71The SCENE function (☞p. 41) can be edited from the SCENE menu displayed on the TV screen.Editing a sceneVarious settings, such as the name

SETUPEditing the SCENE function (SCENE menu) En 72SCENE menu Registering SCENE function settingsSaveRegisters adjustments to SCENE menu setting for ea

SETUP En 73Sound effects can be adjusted from the Sound Program menu.Editing sound programsAdjust sound field elements (sound program parameters) to a

En 74SETUPSetting sound program parameters (Sound Program menu)CINEMA DSP parametersDSP LevelChange the effect level (level of the sound field effect

En 75SETUPSetting sound program parameters (Sound Program menu)LivenessSurround LivenessSurround Back LivenessLiveness. Surround and surround back li

SETUPSetting sound program parameters (Sound Program menu) En 76Reverb LevelReverberation level. Adjusts the volume of the reverberation sound. The la

SETUPSetting sound program parameters (Sound Program menu) En 77Front Presence R LevelAdjusts the volume of the front presence R channel. J1Parameters

SETUP En 78Various settings, such as speaker volume or HDMI functions, can be changed from the Setup menu.Operating the Setup menu1Press jON SCREEN.2P

En 79SETUPSetting various functions (Setup menu)Setup menu Manages settings for speakersSpeaker Setup items Automatic speaker setupAuto SetupOptimize

INTRODUCTION En 8Front panela MAIN ZONE A (MAIN ZONE Power)Switches this unit between on and standby mode.b HDMI Through/iPod Charge indicatorLights u

SETUPSetting various functions (Setup menu) En 80ConfigurationAdjusts the output characteristics of the speakers based on manually set parameters. Fro

SETUPSetting various functions (Setup menu) En 81SubwooferConfirms the subwoofer.PhaseSets the phase of the subwoofer if the bass audio is lacking or

SETUPSetting various functions (Setup menu) En 82Parametric EQAdjusts sound quality of tone using a parametric equalizer.PEQ SelectSelect an equalizer

En 83SETUPSetting various functions (Setup menu)Setting the audio output function of this unitSound Setup items Synchronizing audio/video outputLipsy

SETUPSetting various functions (Setup menu) En 84 Setting the startup volumeInitial VolumeSets the initial volume for when this receiver is turned on.

SETUPSetting various functions (Setup menu) En 85 Adjusting resolution and aspect ratio with conversion of video signal to HDMIProcessingAdjust resolu

SETUPSetting various functions (Setup menu) En 86 Receiver operation via TV (HDMI Control)HDMI ControlSet the HDMI Control function to “On” to operate

En 87SETUPSetting various functions (Setup menu) Specify whether or not audio signal is output through this unit and a TVAudio OutputChoose whether a

En 88SETUPSetting various functions (Setup menu)Making the receiver easier to useFunction Setup items Goes enter standby mode automatically when you

SETUPSetting various functions (Setup menu) En 89 Setting TRIGGER OUT functionsTrigger OutputSets the TRIGGER OUT jack to function synchronized with p

INTRODUCTIONPart names and functions En 9Rear panela DOCK jackFor connecting an optional Yamaha iPod universal dock (such as YDS-12), iPod wireless re

SETUP En 90A variety of information for this unit can be displayed.Selecting information1Press jON SCREEN.2Use kCursor B / C to select “Information” a

SETUP En 91You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external compo

SETUPControlling other components with the remote control En 92Default remote control code settingsThe following remote control codes are assigned to

SETUPControlling other components with the remote control En 934Enter a remote control code “2064” using mNumeric keys. J1Once the remote control code

SETUP En 94The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as

SETUPExtended functionality that can be configured as needed (Advanced Setup menu) En 95Avoiding crossing remote control signals when using multiple Y

SETUPExtended functionality that can be configured as needed (Advanced Setup menu) En 96Changing FM/AM frequency steps (Asia and General models only)Y

SETUP En 97This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If devices that support HDMI Contro

SETUPUsing the HDMI Control function En 98 Switching the input source on this unit automatically when listening to TV audioWhen the HDMI Control (☞p.

SETUPUsing the HDMI Control function En 99 Single HDMI cable input to TV audio with Audio Return Channel functionWhen using a TV that supports HDMI fu