Yamaha V3 Owner's Manual download pdf (Page 435)

100

101

Chapter 6 Component Guide

DME Designer Owner’s Manual

435

 Input Master

If you click the [Input Master] button in the delay matrix component editor, it will open the [Delay

Matrix - InputMaster] editor window. Here you can turn the master input for each channel ON and

OFF and set the level.

 Output Master

If you click the [Output Master] button in the delay matrix component editor, it will open the [Delay

Matrix - OutputMaster] editor window. Here you can turn the master output for each channel ON

and OFF and set the level.

Section Parameter Setting Range Function

Input Phase ON/OFF Reverses the phase of each channel’s signal.

Level -∞ to +10 dB Sets the level of the signal from each channel’s

input.

Solo ON/OFF Turns ON solo for each channel. If Solo is engaged

for even one channel, all non-Solo channels will be

muted.

On ON/OFF Turns ON each channel’s input.

Block On -- Turns ON input for all channels in the Input Master

window. When turned ON, the [On] button lights up.

Off -- Turns OFF input for all channels in the Input Master

window.

Nominal -- Resets all input signal levels in the Input Master

window, making them 0 dB.

Minimum -- Resets all input signal levels in the Input Master

windows, making them -∞ dB.

Section Parameter Setting Range Function

Output Meter -- Displays the output signal level for each channel.

Level -∞ to +10 dB Sets the output signal level for each channel.

On ON/OFF Turns ON each channel’s output.

[Delay Matrix - InputMaster] editor window

[Delay Matrix - OutputMaster] editor window

1 2 ... 430 431 432 433 434 435 436 437 438 439 440 ... 517 518

Comments to this Manuals

No comments

Yamaha V3 Owner's Manual Page 435

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha V3