Yamaha SW1000XG Owner's Manual download pdf (Page 73)

KENTON PLUGSTATION USERS MANUAL

A. This is a function, which is only possible via software control. You can adjust programs and basic

controllers for each board individually from the front panel, but SYSEX level editing requires specialist

software. You will also need to adjust the product ID for each unit if you want to have discrete editing, this is

covered in the PLG user manuals, and also can be set from the front panel of PLUGSTATION.

Q. Why does performance change take a few seconds to work?

A. This is due to the large amount of data being sent to the micro controllers on PLUGSTATION, configuring

alternate routings, and also sending offset parameter data to each of the 4 boards.

Q. Do I need the heatsink update for SW1000XG to run PLUGSTATION?

A. No, but Yamaha recommend this update (which is free anyway so you may as well) as well as the latest

flashrom update for SW1000XG (from xgfactory.com) for all SW1000XG owners. It is not 100% required by

PLUGSTATION.

TROUBLESHOOTING

The following information is intended to assist with Troubleshooting and updating the PLUGSTATION. You

may need this information and familiarity with the master menu operation prior to contacting KENTON for

technical support, so please read this section carefully.

MASTER SETTINGS MENU.

Being the nice guys that we are, KENTON have decided to offer a range of diagnostic tools, and restore to

factory default options, should you ever feel the need to restore everything to how it was the day you bought

PLUGSTATION. These options are not for day-to-day use, as we say, and also will knock out all of the main

functions of PLUGSTATION whilst you are in this mode. It is almost impossible to cause irreparable damage

to PLUGSTATION’s operation in this mode, but you should only enter this mode if you have to (for example

an OS update posted on the KENTON website!)

To enter master setup mode turn on the power whilst holding down the DATA ENTRY knob. You will then be

presented with a screen named the EXIT screen

If you press the button again on this screen it will reset PLUGSTATION and carry on as normal. Scrolling

along in this menu mode takes you first to the RESTORE DEFAULTS menu (RDEF)

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

No comments

Yamaha SW1000XG Owner's Manual Page 73