Yamaha SW1000XG Owner's Manual download pdf (Page 22)

KENTON PLUGSTATION USERS MANUAL

DIAGRAM 15: INSERTING THE SW1000XG WITH X BOARD

DIAGRAM 16: THE X-BOARD IN CLOSE UP

Using the plastic spacers supplied with your PLG cards, carefully attach the KENTON X-BOARD to the side

of the SW1000XG, and then attach the PLG interface cable from the SW1000XG PLG interface slot to the

interface connector on the KENTON X-BOARD.

DIAGRAM 17: X-BOARD FITTED TO SW1000XG

Now, being careful to check the orientation, connect the KENTON D-SUB plate connector to the D-SUB

connector on the KENTON X-BOARD. The plate should then be facing in the same direction as the

SW1000XG plate (by plate we mean the front of the SW1000XG where the audio connections are), in other

words, the 44-WAY connector should be facing the same way as the AUDIO and MIDI ports on the

SW1000XG. (See DIAGRAM 18)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

No comments

Yamaha SW1000XG Owner's Manual Page 22