Yamaha SW1000XG Owner's Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
KENTON PLUGSTATION USERS MANUAL
29
Front panel editing
The original concept behind the PLUGSTATION was one of a “faceless box”. Designed initially only for use
with the SW1000XG it quickly became apparent that offering a limited amount of front panel control, and
editing would greatly enhance its appeal. Now, setups could be made and stored in the 64 memory
locations, and used for example in a live situation with a keyboard sending program changes out to
PLUGSTATION, and calling up various setups. Whilst the front panel editing does not offer complete access
to all of the PLG card parameters (nor do most Yamaha hosting products), it does offer enough control to
make subtle changes to the sounds, alter output routings to the optional Y and Z boards and a few other
“housekeeping functions
The other beauty of PLUGSTATION is that its internal microprocessors are FLASH updateable. This means
that just by sending a special KENTON OS UPDATE MIDI file to the unit from any sequencer can make any
changes, bug fixes, or additions to support future Yamaha products quickly and easily. This special mode of
operation is covered in the troubleshooting and FAQ section of this manual.
Each of the many editing windows covered in this section will have a short description of what they are (what
the 4 character abbreviations stand for), how they work, what they do, and the range of values that they can
address). In certain cases a brief technical overview may also apply to a specific parameter.
The editing levels will also be covered, and a prefix for each parameter or display indicating which level they
are found at may be shown before the description. The levels are STATUS,CARD & PARA. VAL will show
the range of values, which apply to each parameter.
FRONT PANEL EDITS
Once you are familiar with the overall functionality of PLUGSTATION it may be time to start getting into the
front panel control. Whilst the front panel does offer a limited amount of control over the individual PLG
cards parameters, we do recommend that if you wish to get into the deeper editing and functionality of the
PLG series cards, that you use appropriate software.
Yamaha’s XGWORKS V2 and above offers support for editing of each of the PLG cards, and normally the
plug in software editor for each board is provided free with the PLG card you wish to edit. XGWORKS LITE
a cut-down version of the Yamaha sequencer also supports editing of PLG card parameters using the plug
in menu option. However this software is not aware of PLUGSTATION and as of time of writing will only
support 3 cards at once. It is recommended that you obtain software such as XGPAD, which has specific
support for PLUGSTATION from www.xgpad.com
.
The PLUGSTATION only has one rotary DATA ENTRY control knob, which also doubles up as a push
button knob. Once you have powered up your PLUGSTATION and found no errors reported (see notes on
possible errors that can occur), and you have installed between 1 and 4 Yamaha PLG cards, it is time to
start editing.
On power up, after the boards and system are scanned and PLUGSTATION has set its wordclock mode,
PLUGSTATION then defaults to the STATUS level, and the MIDI STATUS screen, which indicates MIDI
activity. This level also shows wordclock source, performance number and which slots have a board in (as
shown in diagram 3). This is a useful way to check that each card is working okay, and that MIDI on any 4 of
the 16 possible reception channels is getting through. PLUGSTATION has 64 Performance memory
locations accessible at this level, which allow you to easily recall setups, which you have previously saved,
including volume levels, routing to outputs, and controller data for each of the 4 PLG cards.
These performances can be stored over MIDI SYSEX using the DUNP –(MIDI BULK DUMP) command to
enable you to store even more set-ups should you so wish (the MIDI bulk dump requires a suitable MIDI
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 87 88

Comments to this Manuals

No comments