Yamaha SW1000XG Owner's Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
KENTON PLUGSTATION USERS MANUAL
43
SOPS – SW1000XG Output Select
. IF the Z-board is fitted this will enable you to select which output the
main SW1000XG parts (audio and MIDI) default to. This can be overridden or reset using suitable editing
software such as XGPAD, XGEDIT or XGWORKS. Software such as XGEDIT allows you to set up the
routing for individual parts (Audio or SW1000 SYNTH) easily by selecting the individual output options (This
is covered in great detail in the SW1000XG Advanced Owners Guide which is free from xgfactory.com or in
hard copy from many Yamaha distributors). By default the SW1000XG synth parts and audio parts will route
to the main stereo outputs (the analogue outs on the card, and also channels 1&2 of the SO (Serial Output)
connector. This ZSOP menu allows you to stop the audio and MIDI being sent from the SW1000XG to the
SO being replicated at the 1&2 outputs of PLUGSTATION. (In effect doubling up the sound, which may be
an undesired effect) The parameter range for this is
MUT- SW1000XG MUTE TO Y-OUTPUTS
. If you have the SW1000XG attached to a DS2416 card, and that
in turn is connected to the AX16AT ADAT card for example, you may want to send 8 channels of
SW1000XG audio and synth parts to the DS2416 SUB inputs 1-8 for processing or mixing. You may then
also wish to send 8 channels from the 4 PLG cards you have fitted to PLUGSTATION, out of the ADAT port
of the PLUGSTATION to the ADAT input of the AX16AT, and mix a further 8 channels on the DS2416 of
PLG cards with DS2416 EQ, effects etc using the IOA/B inputs on the DS2416 mixer. This MUTE option
allows you to do this, by effectively routing the SW1000XG parts that would normally go to the DS2416 and
the Y-OUTPUTS, just to the DS2416. It is a very specific requirement, but one which many people due to
the popularity of the DS2416/AX16AT and SW1000XG combination may require.
The value range for this
is ON or OFF (off by default, which means that it is NOT MUTED)
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 87 88

Comments to this Manuals

No comments