Yamaha SW1000XG Owner's Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
KENTON PLUGSTATION USERS MANUAL
13
VAL –
This is the value section. It is here where you enter data values that correspond to the parameter that
you are editing. If we press the DATA ENTRY button quickly again, we drop to this level, and the white dot is
now shown underneath the VAL line. Values can be numerical or sometimes text (such as ON or OFF in the
memory SHLD menu). Values can range from 0-127 or lower (for example MIDI channel range is 1-16). If
you have pressed the button quickly from the BANK MSB menu option (as shown in diagram 6), you will
then see a program number in the value menu similar to that shown in diagram 7.
DIAGRAM 7: PROGRAM NO. 40 IS DISPLAYED
Here we see program 40 is being displayed. This means that the current bank MSB value for the card is 40.
The number you see may be different, but should be between 0 and 127
NOTE: SOME VALUE STATUS DISPLAYS MAY ALSO HAVE A TEXT VALUE (MAYBE TO INDICATE
AN OFF STATUS IF YOU WANT A FUNCTION SWITCHING OFF COMPLETELY BELOW 0)
THE REAR PANEL OF THE KENTON PLUGSTATION
DIAGRAM 8: PLUGSTATION REAR PANEL
Diagram 8 shows the rear panel view of the PLUGSTATION when fitted with the optional Y board. The holes
to accommodate the individual outputs and 24bit ADAT output are pre-drilled into the casing to allow easy
fitting and alignment of the board. The PLG slot blanking plate in this instance is attached. To remove it for
fitting PLG cards please undo the screws located on the left and right hand side of the plate. This is covered
in more detail in the section on installation and setup of PLG cards. The ADAT output is an optical output
conforming to the ALESIS ADAT standard. It can transmit up to 8 discrete channels of audio data (from
SYNTH or AUDIO channels on the SW1000XG (with the optional Z-BOARD also fitted) or SYNTH parts
from the PLG cards (4 cards giving 2 channels each = 8)) at up to 24bit resolution.
The ADAT port does not mean that you have to use it only with an actual ALESIS ADAT tape machine. This
interface port allows you to use the PLUGSTATION with any ADAT compatible device, such as a Yamaha
01V, 03D or 02R digital mixer with appropriate ADAT-YGDAI interface cards. The interface whilst an optical
type is not the same as the TOSLINK 2-channel optical interface (similar to those found on MINIDISC
recorders or DAT machines). It is a 44.1K/16-24 bit ADAT only output port.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

Comments to this Manuals

No comments