Yamaha EMX62M Owner's Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
8
EMX62M Quick Guide
EMX62M—Owner’s Manual
Power on
1 Turn on the power to all external devices con-
nected to the EMX62M.
2 Make sure that the MASTER controls in the
MONITOR section and the MAIN section are set
to “0, then press the POWER switch on the
EMX62M to turn on the power.
Be sure to follow the power up sequence specified
above to prevent the speakers from being damaged.
The speakers do not have a power switch.
Sound output
Set the MASTER control in the MAIN section to
, then while playing an instrument con-
nected to a channel to be checked (or while
speaking to a connected microphone), adjust the
LEVEL control of the corresponding channel so
that the 0 LED of the peak level indicator in the
MAIN section will light up momentarily.
Do not press the PAD switch if sound is input from
the microphone. Otherwise, press the PAD switch
on.
Note that if the LIMITER indicator stays lit for a
long time, the built-in amplifier and speakers may
be damaged.
To correct the low range, turn on the YAMAHA
SPEAKER PROCESSING switch in the upper right
corner of the panel.
Applying built-in effects
1 Turn on the ON switch in the DIGITAL EFFECT
section. The ON switch indicator lights up.
2 Select one of three effect types, then press the
switch.
3 Adjust the amount of effect applied by using the
EFFECT control of the target channel and the
EFFECT RTN control in the MAIN section.
Power off
1 Press the POWER switch of the EMX62M to turn
off the power to the unit.
2 Turn off the power to all connected devices.
Be sure to follow the power off sequence specified
above to prevent the speakers from being damaged.
Set the MASTER controls in the MAIN section and
the MONITOR section to “0” for use next time (so
that a loud noise will not sound the next time you
turn on the power to the unit).
STEP 2
EMX62M
STEP 3
EMX62M
STEP 4
EMX62M
STEP 5
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments