Yamaha EMX62M Owner's Manual download pdf (Page 8)

EMX62M Quick Guide

EMX62M—Owner’s Manual

EMX62M Quick Guide

The following steps (1-5) explain the basic con-

nection and operation of the EMX62M.

Also, please read “Front and Rear Panel” and

“Basic Operation” following this Quick Guide

section to learn more about using the EMX62M.

Connection

Connecting speakers

Using speaker cables, connect each speaker to the

SPEAKERS 1 and 2 jack on the rear panel of the

EMX62M.

•The EMX62M is a monaural mixer. The same signal

will be output from all SPEAKERS jacks on the rear

panel. You do not need to differentiate right from

left speakers.

•You may connect to either of the two jacks on the

speakers.

•Be sure to use a cable designed for speaker connec-

tion.

Never connect the speakers in the manner shown

below. Otherwise, the EMX62M’s built-in power

ampliﬁer will be damaged.

Connecting a microphone

Make sure that the power is turned off to the

EMX62M.

Connect a microphone to the Low-Z jack of

channel 1-4.

Using a condenser microphone

Turn on the PHANTOM switch (located in the

upper right corner on the panel).

•Do not connect or disconnect a condenser micro-

phone while the power to the unit is on and the

PHANTOM switch has been turned on.

Connecting a CD player, MD player, and/or cassette

deck

Connect a CD player or MD player to the 2TR IN

jacks. Refer to the operation manual of the corre-

sponding device for more information on the

input and output of the device.

STEP 1

EMX62M

Microphone

EMX62M

PHANTOM switch

EMX62M

Recorder

(Cassette, DAT, MD)

CD player

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comments to this Manuals

No comments

Yamaha EMX62M Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Audio equalizers Yamaha EMX62M