Yamaha TSX-100 Owner's Manual download pdf (Page 29)

25 En

English

ADDITIONAL

INFORMATION

■ Replacing the battery in the remote control

Change the battery when the operation range of the remote control decreases.

• Insert the battery according to the polarity markings (+ and –).

• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.

• If a battery starts leaking, dispose of it immediately. Be careful not to let the leaking battery acid touch your skin or clothing.

• Before inserting new batteries, wipe the compartment clean.

• Dispose of batteries according to your regional regulations.

Remote control

Problem Cause Solution

The remote control does not

work properly.

The remote control may be operated

outside its operation range.

For information on the remote control

operation range, refer to “Using the

remote control” (☞ P. 5).

The remote control sensor on this

unit may be exposed to direct

sunlight or lighting (inverted

fluorescent lamps).

Change the lighting or orientation of

this unit.

The battery may be worn out. Replace the battery with new one (see

below).

There are obstacles between the

sensor of this unit and the remote

control.

Remove the obstacles.

Use a straight pin to remove

the cover.

Replace the battery with

a new CR2025 battery.

Close the cover.

Notes

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 227 228

No comments

Yamaha TSX-100 Owner's Manual Page 29