Yamaha TSX-100 Owner's Manual download pdf (Page 28)

24 En

Troubleshooting

■ FM/AM

■ FM

■ AM

MP3/WMA file playback

Problem Cause Solution

MP3/WMA file in the USB

device is not played.

The USB device is not recognized.

Set this unit to the standby mode, and turn it

on again

(☞ P. 6).

Disconnect the device while this unit is in

the standby mode. Then connect the device

again and turn on this unit

(☞ P. 6).

Connect an AC adapter if supplied with

the device.

If the solutions above do not resolve

the problem, the USB device is not

playable on this unit.

Try another USB device.

Radio reception

Problem Cause Solution

The preset selecting

function (☞ P. 16) does not

work.

The preset (memory) may have been

erased.

Preset radio stations again (☞ P. 17).

The preset station settings

have been cleared.

The power to this unit may have been

lost more than a week.

Plug the power cable into the outlet

firmly, and preset the stations again

(☞ P. 6).

Problem Cause Solution

Too much noise during

stereo broadcast.

The FM antenna may be connected

improperly.

Make sure the FM antenna is connected

properly (☞ P. 16).

The radio station you selected may

be far from your area, or the radio

wave reception is weak in your area.

Try manual tuning to improve the

signal quality (☞ P. 17) or use a multi-

channel outdoor antenna.

Even with an outdoor

antenna, radio wave

reception is weak. (Sound is

distorted.)

Multipath reflection or other radio

interferences may have occurred.

Change the height, direction, or

placement of the antenna.

Problem Cause Solution

Too much noise during

broadcast.

The noise may be caused by

atmospheric electricity, lightning,

fluorescent lights, motors, or

thermostat electric devices.

Connect an outdoor antenna and

establish a better grounding to decrease

the noise. However, it is difficult to

eliminate these types of noise.

If this unit is placed near a TV, the

noise may be generated especially in

the evening.

Place this unit away from a TV.

The auto tuning function

(☞ P. 18) does not work.

The AM loop antenna may be

connected improperly.

Make sure the AM loop antenna is

connected properly (☞ P. 16).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 227 228

Comments to this Manuals

No comments