Yamaha BEARTRACKER YFM250XN Owner's Manual download pdf (Page 110)

8-7

6. Clean the oil strainer and oil filter with

solvent.

7. Inspect the O-ring and replace if

damaged.

8. Reinstall the oil filter, O-ring, oil filter

cover.

9. Replace the oil strainer, compression

spring, O-ring and drain plug. Then,

tighten the drain plug and oil filter cov-

er bolts to the specified torques.

CAUTION:

Before reinstalling the drain plug, be sure

to install the O-ring, compression spring

and oil strainer.

10. Fill the engine with oil and install the

dipstick.

CAUTION:

Be sure no foreign material enters the

crankcase.

11. Warm up the engine for several min-

utes at idle speed. Check for oil leak-

age while warming up.

Tightening torque:

Drain plug (engine):

43 Nm (4,3 m·kg, 31 ft·lb)

Filter cover bolt:

10 Nm (1.0 m·kg, 7.2 ft·lb)

Recommended oil:

See page 5-7.

Oil quantity:

Periodic oil change:

1.5 L (1.3 Imp qt, 1.6 US qt)

With oil filter replacement:

1.6 L (1.4 Imp qt, 1.7 US qt)

Total amount:

1.8 L (1.6 Imp qt, 1.9 US qt)

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 155 156

No comments

Yamaha BEARTRACKER YFM250XN Owner's Manual Page 110