Yamaha BEARTRACKER YFM250XN Owner's Manual download pdf (Page 108)

8-5

EBU00270*

Engine oil

Engine oil level measurement

1. Place the machine on a level place.

2. Warm up the engine for several min-

utes and stop it. Wait at least ten min-

utes for the oil to drain back into the

crankcase before checking the oil

level.

TE:

Wait at least ten minutes until the oil level

settles before checking.

3. Remove the dipstick and wipe it off

with a clean rag. Insert the dipstick in

the filler hole without screwing it in.

4. Remove the dipstick and inspect the

oil level.

5. The oil level should be between the

maximum and minimum marks. If the

level is low, add oil to raise it to the

proper level.

CAUTION:

Be sure no foreign material enters the

crankcase.

1. Dipstick 2. Maximum level mark

3. Minimum level mark

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 155 156

No comments

Yamaha BEARTRACKER YFM250XN Owner's Manual Page 108