Yamaha MDF3 Owner's Manual download pdf (Page 55)

55

UTIL

4.

Insert the target disk.

Remove the source disk from the disk

drive, and insert a newly formatted disk.

5.

Press the START/STOP key.

The following display will appear as the

MDF3 writes data to the target disk.

After a few moments, the “Insert Source!”

message will reappear. Repeat steps 2

through 5 until the completed message

appears.

6.

Back up other disks.

If you want to copy another disk, press

the START/STOP button; or press the

mode keys (MDR, SEQ, JOB, or UTIL) to

exit the function.

Hint: The MDF3 can copy approximately 100

kilobytes of data at one time. When you copy a

disk containing a large amount of data, you will

have to repeat steps 2 through 5 several times.

If you want to estimate the number of times

you will have to exchange disks to complete

the backup process, use the “Disk Info” func-

tion to check how much of the source disk has

been used before you execute the function.

If you have a personal computer with two

disk drive capable of handling 3.5" 2HD/2DD

floppy disks, you may find it easier to back

up your MDF3 data disks using the computer!

Note: Please use the same type of disks to

back up your data. If you attempt to back up

your data in 2HD disk to 2DD disk or vice

versa, the “Bad Disk” message will appear

and the backup will be rejected.

Now~writing...

Completed~!

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 71 72

Comments to this Manuals

No comments