Yamaha DX100 User Manual Page 35
- Page / 61
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
The beginning of the LFO cycle is normally synchronized with key-on timing. This
parameter permits turning this synchronization on or off. All operators are affected
simultaneously.
When this parameter is on, the LFO cycle always begins from the peak of a positive
half-cycle (90 degrees phase angle) when a key is played. This produces a clear,
consistent attack on all notes.
When LFO KEY SYNC is OFF, the LFO cycle starts from a random point when a
key is played. This is the ideal setting when the LFO is being used to create na-
tural-sounding chorus or phasing- type effects.
9: PITCH MODULATION SENSlTIVITY
This parameter sets the sensitivity of all operators to pitch modulation applied either
via the LFO PMD parameter, above, or via the modulation wheel or breath controller.
The data range is from 0 to 7. At 0, no pitch modulation can be applied, and at 7
the maximum pitch modulation can be achieved. When LFO PMD, above, is set
to 99, a setting of 7 produces a
±800 cent pitch variation.
10: AMPLITUDE MODULATION SENSITIVITY
This sets the operator’s sensitivity to LFO effects applied via the LFO PMD or AMD
functions, or via the modulation wheel or breath controller.
The application of LFO modulation to a carrier results in tremolo, and applied to
a modulator the result is a periodic variation in timbre similar to wah effects. Applied
to a modulator, the result is brilliance control.
The data range is from 0 to 3. At 0, amplitude modulation sensitivity is OFF and
no LFO effects can be applied to the selected operators. A setting of 3 produces
maximum sensitivity and therefore maximum effect depth.
The operators to which modulation sensitivity is to be applied are selected using
buttons BANK A through BANK D. The four digits—1 or 0—at the right side of the
LCD correspond to operators 1 through 4. When an operator is turned ON, i.e. able
to receive amplitude modulation, the corresponding digit will be a “1”. When OFF,
the corresponding digit will be a “0”. The operators are turned ON and OFF al-
ternately each time the corresponding OPERATOR/AMS ON-OFF button is pressed.
11: EG BIAS SENSITIVITY
This sets the operator’s sensitivity to EG BIAS effects applied via the breath con-
troller. EG bias changes the overall output level from the operator. The harder you
blow into the breath controller, the higher the maximum envelope level. When EG
BIAS is applied to a carrier via the breath controller, the result is volume (expression)
control. Applied to a modulator, the result is brilliance control.
The data range is from 0 to 7. At 0, EG BIAS sensitivity is OFF and no EG BIAS
33
- PRODUCT MANUAL 1
- OWNER’S 2
- CONGRATULATIONS! 3
- PRECAUTIONS 4
- CHAPTER I: SETTING UP 5
- The 24-voice INTERNAL memory 8
- SEARCH function 11
- THE FUNCTION MODE 13
- CHAPTER IV: 16
- 7: INIT VOICE 20
- 8: BANK EDIT 20
- 9: CASSETTE SAVE/VERIFY 21
- 10: LOAD 22
- 11: LOAD SINGLE 23
- DX21 CASSETTE LOAD 24
- 12: MEMORY PROTECT 24
- 6. MIDI Functions 24
- 2: MIDI ON-OFF 24
- 3: CHANNEL 24
- 4: CH INFO 25
- 5: SYS INFO 25
- CHAPTER IV: VOICE PROGRAMMING 26
- 1. The Basics of FM 26
- Synthesis 26
- OPERATORS 26
- CARRIERS AND MODULATORS 26
- ALGORlTHMS 27
- ALGORITHM #1 27
- ALGORITHM #5 28
- FEEDBACK 29
- ENVELOPE GENERATORS 29
- BASIC EG CURVE 30
- 2. The EDIT and 31
- COMPARE Modes 31
- 3. The Voice 32
- Parameters 32
- PB MODE: OPERATOR SELECT 32
- 2: FEEDBACK 33
- 3: LFO WAVE 33
- 4: LFO SPEED 33
- 5: LFO DELAY 34
- 6: LFO PMD 34
- 7: LFO AMD 34
- 8: LFO SYNC 34
- 11: EG BIAS SENSITIVITY 35
- 12: KEY VELOCITY 36
- 13: FREQUENCY RATIO 36
- 14: DETUNE 37
- ENVELOPE GENERATOR 37
- PIANO E.G. CURVE 38
- ORGAN E.G. CURVE 38
- BRASS E.G. CURVE 38
- 20: OPERATOR OUT LEVEL 38
- 21: RATE SCALING 38
- 4. Storing Voice Data 39
- 5. Two Approaches to 39
- Creating Your Own 39
- Initialize a Voice 41
- Selecting the Algorithm 41
- STEP 15: 44
- STEP 16: 44
- GENERAL SPECIFICATIONS 45
- MIDI DATA FORMAT 46
- 2. Transmission Data 47
- 2-2 System Information 48
- System Exclusive Message 48
- Byte count 49
- 00000000(00) 49
- 3. Reception 50
- Conditions 50
- 4. Reception Data 51
- Parameter no 54
- Parameter 54
- P Bend Range 55
- Full T. Porta 55
- Porta Time 55
- MW Ampli 55
- 5-3. FUNCTION PARAMETERS 56
- VOICE/FUNCTION DATA 58
- VOICE NAME 59
- Recycled 61
Related products and manuals for Synthesizer Yamaha DX100
Synthesizer Yamaha P-155 User Manual
(72 pages)
(72 pages)
Synthesizer Yamaha VL70 Manual
(123 pages)
(123 pages)
Synthesizer Yamaha EX5 Owner's Manual
(304 pages)
(304 pages)
Synthesizer Yamaha MU50 Owner's Manual
(140 pages)
(140 pages)
Synthesizer Yamaha P-70 User Manual
(36 pages)
(36 pages)
Synthesizer Yamaha DGX-660 Owner's Manual
(96 pages)
(96 pages)
Synthesizer Yamaha PLG150-PF User Manual
(8 pages)
(8 pages)
Synthesizer Yamaha PSR-S710 User Manual
(112 pages)
(112 pages)
Synthesizer Yamaha PSR-4000 User Manual
(165 pages)
(165 pages)
Synthesizer Yamaha QY 300 Owner's Manual
(144 pages)
(144 pages)
Synthesizer Yamaha PSR8000 Owner's Manual
(206 pages)
(206 pages)
Synthesizer Yamaha CLP-920 Owner's Manual
(32 pages)
(32 pages)
Synthesizer Yamaha YDP-V240 Manual
(152 pages)
(152 pages)
Synthesizer Yamaha CLP-295GP Owner's Manual
(124 pages)
(124 pages)
Synthesizer Yamaha DGX-505 Owner's Manual
(112 pages)
(112 pages)
Synthesizer Yamaha ELS-02 User Manual
(212 pages)
(212 pages)
Synthesizer Yamaha PLG150PF Owner's Manual
(48 pages)
(48 pages)
Synthesizer Yamaha DME4IO-C User Manual
(52 pages)
(52 pages)
Sangean RCR-4 (V1) Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Radio Sangean RCR-4 (V1).
Wir stellen 4 PDF-Handbücher Sangean RCR-4 (V1) zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Sangean RCR-4 (V1) Bedienungsanleitung (24 Seiten)
Marke: Sangean | Kategorie: Radio | Größe: 0.12 MB |
Inhaltsverzeichnis
Sangean RCR-4 (V1) Bedienungsanleitung (20 Seiten)
Marke: Sangean | Kategorie: Radio | Größe: 0.12 MB |
Inhaltsverzeichnis
RDS de FM
10
Toma AUX IN
20
Sangean RCR-4 (V1) Bedienungsanleitung (22 Seiten)
Marke: Sangean | Kategorie: Radio | Größe: 0.12 MB |
Weitere Produkte und Handbücher für Radio Sangean
| Modelle | Dokumententyp |
|---|---|
| RCR-7WF (R3) |
Bedienungsanleitung
Sangean RCR-7WF (R3) Benutzerhandbuch,
40 Seiten
|
| RCR-7WF (R3) |
Bedienungsanleitung
Sangean RCR-7WF (R3) Manual del usuario,
40 Seiten
|
| RCR-7WF (R3) |
Bedienungsanleitung
Sangean RCR-7WF (R3) Manuel d'utilisation [de] ,
40 Seiten
|
| SG-622 (V1) |
Bedienungsanleitung
Sangean SG-622 (V1) User Manual,
10 Seiten
|
| SR-25 (V1) |
Bedienungsanleitung
Sangean SR-25 (V1) User Manual [de] [it] ,
2 Seiten
|
| SR-3 (V1) |
Bedienungsanleitung
Sangean SR-3 (V1) User Manual,
2 Seiten
|
| U2 (V1) |
Bedienungsanleitung
Sangean U2 (V1) Benutzerhandbuch,
9 Seiten
|
| U2 (V1) |
Bedienungsanleitung
Sangean U2 (V1) Manual del usuario,
8 Seiten
|
| U2 (V1) |
Bedienungsanleitung
Sangean U2 (V1) Manuel d'utilisation,
8 Seiten
|
| U2 (V1) |
Bedienungsanleitung
Sangean U2 (V1) User Manual,
8 Seiten
|
| UCR-100 (V1) |
Bedienungsanleitung
Sangean UCR-100 (V1) Benutzerhandbuch,
14 Seiten
|
| UCR-100 (V1) |
Bedienungsanleitung
Sangean UCR-100 (V1) Manual del usuario,
14 Seiten
|
| UCR-100 (V1) |
Bedienungsanleitung
Sangean UCR-100 (V1) Manuel d'utilisation,
14 Seiten
|
| UCR-100 (V1) |
Bedienungsanleitung
Sangean UCR-100 (V1) User Manual,
14 Seiten
|
| WFR-1 (V1) |
Bedienungsanleitung
Sangean WFR-1 (V1) Benutzerhandbuch,
39 Seiten
|
| WFR-1 (V1) |
Bedienungsanleitung
Sangean WFR-1 (V1) Manual del usuario,
39 Seiten
|
| WFR-1 (V1) |
Bedienungsanleitung
Sangean WFR-1 (V1) Manuel d'utilisation,
39 Seiten
|
| WFR-1 (V1) |
Bedienungsanleitung
Sangean WFR-1 (V1) User Manual,
39 Seiten
|
| WFR-1 (R1) |
Bedienungsanleitung
Sangean WFR-1 (R1) Benutzerhandbuch,
41 Seiten
|
| WFR-1 (R1) |
Bedienungsanleitung
Sangean WFR-1 (R1) Manuel d'utilisation,
42 Seiten
|
© 2020, manymanuals.com. All rights reserved. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals