Yamaha RX-V863 User Manual download pdf (Page 112)

110 En

Advanced setup

■ Bi-amplifier setting BI-AMP

Use this feature to activate or deactivate the bi-amplifier

function (see page 16).

Choices: ON, OFF

• Select “ON” if you want to activate the bi-amplifier

function. “SUR.B L/R SP” is set to “NONE”

automatically, and this unit outputs the front channel

audio signals at the SURROUND BACK/BI-AMP

speaker terminals.

• Select “OFF” if you want to deactivate the bi-amplifier

function.

When “BI-AMP” is set to “ON”, you can only select “FRONT

B”, “ZONE B”, or “NONE” in “EXTRA SP ASSIGN” (see

page 77).

■ SCENE IR code setting SCENE IR

Use this feature to output the remote control signals at the

REMOTE OUT jack automatically when this unit is in the

SCENE mode.

Choices: ON, OFF

• Select “ON” when the component connected to the

REMOTE OUT jack is the Yamaha component and has

the capability of the SCENE control signals. This unit

automatically sends the remote control signals to the

component.

• Select “OFF” when the component connected to the

REMOTE OUT jack is not the Yamaha component and

does not have the capability of the SCENE control

signals.

If noises are output when you operate the SCENE function, set

“SCENE IR” to “OFF”.

■ Monitor check MON.CHK

Use this feature to activate or deactivate the monitor check

function of this unit. When this parameter is set to “YES”,

this unit receives the information of the available video

signal resolutions from the video monitor connected via

HDMI and you can only select the resolutions supported

by the video monitor in “HDMI RES.” (see page 89).

When “MON. CHK” is set to “SKIP”, you can select any

resolution in “HDMI RES.”.

Choices: YES, SKIP

■ Tuner frequency step TU

(Asia and General models only)

Use this feature to set the tuner frequency step according

to the frequency spacing in your area.

Choices: AM10/FM100, AM9/FM50

• Select “AM10/FM100” for North, Central and South

America.

• Select “AM9/FM50” for all other areas.

■ Parameter initialization INIT

Use this feature to reset the parameters of this unit to the

initial factory settings. You can select the category of

parameters to be initialized.

Choices: DSP PARAM, VIDEO, ALL, CANCEL

• Select “DSP PARAM” to initialize all the parameters

of the sound field programs (see page 64).

• Select “VIDEO” to initialize the parameters in

“VIDEO SET” (see page 88) and “OSD SHIFT” in

“DISPLAY SET” (see page 88).

• Select “ALL” to initialize all the parameters of this

unit.

• Select “CANCEL” to cancel the initialization

procedure.

Use “INITIALIZE” in the sound field program menu to initialize

the parameters of the desired program (see page 64).

See page 107 for the operation of the advanced setup.

Note

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 273 274

Comments to this Manuals

No comments

Yamaha RX-V863 User Manual Page 112

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Yamaha RX-V863