Yamaha RX-V863 User Manual download pdf (Page 108)

106 En

Using multi-zone configuration

Operating Zone 2

Rotate the

INPUT selector to select the

desired input source while the ZONE2 indicator

is flashing in the front panel display.

• Select “TUNER” as the input source to use the TUNER

features in Zone 2. For details about the TUNER

operations, see “FM/AM tuning” on page 53.

• Select “V-AUX” as the input source to use iPod

features or Bluetooth features in Zone 2. For details

about the iPod operations, see “Using iPod™” on

page 60 or “Using Bluetooth™ components” on

page 62.

Set Zone 2 to the standby mode

Press

ZONE 2 ON/OFF to set Zone 2 to the

standby mode.

Press

SYSTEM OFF to set the main zone and Zone 2 to the

standby mode simultaneously.

■ Controlling Zone 2 with the remote

control

Activating the Zone 2 operation mode

Set the operation mode selector to

AMP and

then press

SELECT k repeatedly to select the

Zone 2 operation mode.

“ZONE 2” is displayed in the display window (

) on the

remote control.

To deactivate the Zone 2 operation mode, press

SELECT

repeatedly to select other than “ZONE 2”.

Turning on or off Zone 2 using the remote control

POWER and

STANDBY on the remote control

work differently depending on the selected zone that

appears in the display window (

) on the remote control.

• When the main zone, Zone 2 mode is selected, you can

turn on the main zone or Zone 2 or set them to the

standby mode individually.

• When the all mode is selected, pressing

POWER

turns on the main zone and Zone 2 simultaneously and

pressing

STANDBY sets them to the standby mode

simultaneously.

• When the remote control is in the main zone mode, “MAIN”

appears for a few seconds when

POWER or

STANDBY

is pressed.

• “ALL” appears in the display window (

) on the remote

control only when

SELECT n is pressed.

Selecting the input source of Zone 2

Press one of the input selector buttons (

) to

select the input source of the selected zone.

If the remote control is used to select the input source, “2;

name of the selected input area” is displayed in the display

window (

) on the remote control when Zone 2 is

selected respectively.

The selected input source is shared across all zones.

Operate the following operations after activating the Zone 2

operation mode.

SELECT

SOURCE

AMP

Control mode

Display window

(

)

POWER

and

STANDBY

Main zone

mode

Name of the selected

input area

Turns on the main

zone only or sets it to

the standby mode.

Zone 2 mode

“ZONE 2” or “2;name

of the selected input

area”

Turns on Zone 2 or

sets it to the standby

mode.

All mode

“ALL” E

POWER: turns on

the main zone and

Zone 2.

STANDBY: sets

the main zone and

Zone 2 to the standby

mode.

Notes

Note

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 273 274

Comments to this Manuals

No comments

Yamaha RX-V863 User Manual Page 108

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Yamaha RX-V863

Related products and manuals for Health and hygiene Bosch PHD5987S Keratin Advance Haartrockner SYOSS Glossi