Yamaha M170 User Manual download pdf (Page 22)

www.motec.com

Europe Product Catalogue: Released January 2015

Red: PMS485

ECU ACCESSORIES

ECU Accessories include a mating connector unless otherwise stated

ECU ACCESSORIES PART NO.

Ignition Expander 14001

AS Connector Ignition Expander (needs connector 68087) 14006

Traction Control Multiplexer 14002

AS Connector TC Multiplexer (needs connector 68087) 14005

Pierburg Boost Control Valve (includes connector) 58004

3 Port Boost Control Valve 58020

ECU ACCESSORY CONNECTORS PART NO.

22 Pin Autosport IEX/TCMux Connector (AS612-35SN) 68087

DBW-4 Drive By Wire Module

The DBW-4 works with M400/M600/M800/M880 ECUs running firmware V3.30T and later, and provides 4 PID

Controllers for drive by wire control, or generic PID control for servo motors. The use of a DBW-4 does not require a

DBW upgrade in your ECU. Mating connector available separately.

DBW-4 DRIVE BY WIRE MODULE PART NO.

MoTeC DBW-4 14011

66 Pin Autosport DBW-4 Connector (AS618-35SN) 68089

Knock Monitoring and Control

Knock Modules work with vehicle knock sensors to provide individual cylinder closed loop knock control, allowing

tuners to safely optimise high performance ignition maps. There is a standalone module and a version specifically

designed to mount onto an M800 Plug-In ECU. A competent tuner needs to carry out a frequency analysis to determine

the target frequency and knock module settings. This is highly specialised work.

MoTeC Knock Modules will only be available through authorised dealers that have undertaken specific training.

KNOCK MONITORING AND CONTROL PART NO.

OKM Onboard Knock Module (for M800 PandP ECUs) 53115

Mitsubishi EVO X OKM Onboard Knock Module 53121

SKM Standalone Knock Module 53116

Knock Sensor Loom (for use with SKM) 61114

DTM Connectors for SKM 68054

DHB - Dual Half Bridge

The DHB is a high current amplifier which allows low current auxiliary outputs to drive high current loads such as

motors. It contains two high current half bridge outputs, and connects to any auxiliary output of a MoTeC ECU or

Dash Logger, which performs the control function, such as PWM speed control, direction control or servo control.

Mating connectors available separately.

DHB DUAL HALF BRIDGE PART NO.

DHB Dual Half Bridge (needs connectors 68050, 79121 & 79125. See pg 24) 41213

ENGINE MANAGEMENT

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

No comments

Yamaha M170 User Manual Page 22