Yamaha YPDR601 User Manual download pdf (Page 21)

5 • Connection - Audio connections

5 • Connection

NOTE: Make all control and audio connections before connecting power to ei

ther the main unit or the controller. If power connections have already been

made, and the system is being re-configured, make sure all components on the

system are turned OFF before proceeding.

5.1 Audio connections

The YPDR may be connected to any monitoring system using the -2dB ANA

LOG OUT (4) connectors.

Headphone monitoring is possible using the headphone output at the rear of the

controller. This level from this output can be controlled using the level control

beside the output.

While recording, it may be necessary to adjust the volume of the signal sent to

the main unit (either analog or digital). This is best achieved by routing the

source signal through a mixing console (in the case of a digital signal, a console

such as the YAMAHA DMC1000 is ideal).

5.2 Single-recorder connection

This configuration is used when recording from a stereo source onto disc.

Set the DRIVE SELECT switch on the controller to "0".

YPDR

Connection -17

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

No comments

Yamaha YPDR601 User Manual Page 21