Yamaha YPDR601 User Manual download pdf (Page 15)

3 • Main unit (YPDR601) - Rear panel

recorders together. See the section on "Multi-recorder connection" on page 19

for details.

REMOTE connector

This 9-pin serial connector is used to transmit remote control commands. A

source machine can receive remote "PLAY" and "STOP" commands issued

from this connector.

To use this REMOTE connector with a DMR8 or DRU8, make sure that the re

mote protocol on the DMR8 or DRU8 is set to Type 2.

I/O OUT

when used in a single-recorder configuration (see "Single-recorder connection"

on page 17), this connector should be terminated with the supplied 50-pin ter

minator. In a multi-recorder configuration (see "Multi-recorder connection" on

page 19), this is used to "daisy-chain" recorders together. The last unit in the

chain is must be terminated.

Parallel I/O connector

This parallel general purpose interface (GPI) connector is used to transmit and

receive remote control commands such as PLAY, PAUSE and STOP. In addition,

track and index increment functions can be remotely controlled. See "PARAL

LEL I/O (D-sub 15-pin)" on page 34 for details of the connection.

LOCK/RELEASE

As described in "Head locking system" on page 5, this lever is used to lock the

laser head when transporting or moving the recorder unit.

YPDR

Main unit (YPDR601) - 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

No comments

Yamaha YPDR601 User Manual Page 15