4-25
EBU10020
Auxiliary DC jack
The auxiliary DC jack is located at the front
right side of the ATV.
The auxiliary DC jack can be used for suitable
work lights, radios, etc.
The auxiliary DC jack should only be used
when the engine is running.
1. Set the light switch to “OFF”.
1. Auxiliary DC jack cap
2. Start the engine. (See pages 6-1–6-3.)
3. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
4. When the auxiliary DC jack is not being
used, cover it with the cap.
CAUTION:
_
●
Do not use accessories requiring
more than the above maximum capac-
ity. This may overload the circuit and
cause the fuse to blow.
●
If accessories are used without the
engine running or with the headlights
turned on, the battery will lose its
charge and engine starting may be-
come difficult.
●
Do not use an automotive cigarette
lighter or other accessories with a
plug that gets hot because the jack
can be damaged.
_
Maximum rated capacity for the auxiliary
DC jack:
DC 12 V, 120 W (10 A)
U1D910.book Page 25 Thursday, May 27, 2004 11:08 AM
Comments to this Manuals