S,O..LSYSTEMIE'Ec G-3I S,O..LSYSTEMIE'Ec
2. The tail light does not work. 3. Flasher does not work
I1. I 1. "TURN" switch INCORRECT
Refer to.SWiTCH ,NSPECT,ON.. IINCORREcTBrakeswitch i Refer to .SWITCH INSPECTION.. I "_
.J_ CORRECT .J_ CORRECT IRep lace left handlebar switch"
2. Voltage I Replace brake switch. I 2. Voltage
• Connect the pocket tester (DC20V) to the • Connect the pocket tester (DC20V) to the
socket, flasher relay. --'.
Pocket tester (+) lead --*Green / Yellow (_ Pocket tester (+) lead -_ Brown (_)
Pocket tester (-) |cad _ B|ack _ Pocket tester (-) lead _ Ground (_
° Turn the main switch to 'ON" • Turn the main switch to ON
• Pull the brake lever. • Check the voltage (12V) between the"Brown"
• Check the voltage (12V) between" Green lead and the ground. )UT OF SPECIFICATION
Yellow" (_ and "Black" (_). n MEETS
SPECIFICATIONS
_ _" .... ', 3. Voltage I Wiring circuit from main switch to flasher relay I
" ,' Y I connector is faulty "-* Replair. I
, , L Connect the pocket tester (DC2OV) to the
flasher relay.
Pocket tester (+) lead -_ Brown/White O
B OUT OF SPECIFICATION Pocket tester (-) lead _ Ground (_
• Turn the main switch to ON
,_ MEETS • Checkthe voltage (12V)between the"Brown/
SPECIFICATION _Wiring circuit from main switch to bulb socket I White" lead and the ground.
I Circuit is good. I I connector is faulty..-* Repair. I n MEETS OUT OF SPECIFICATION
SPECIFICATIONS
I Replace flasher relay. I
7 - 27 7 - 28
Comments to this Manuals