Yamaha 2006 Royal Star Tour Deluxe Owner's Manual download pdf (Page 21)

INSTRUMENT AND CONTROL FUNCTIONS

3-4

3

● a clock

● a fuel meter

Odometer and tripmeter modes

Pushing the “SELECT” button switches

the display between the odometer

mode “ODO” and the tripmeter modes

“TRIP 1” and “TRIP 2” in the following

order:

ODO → TRIP 1 → TRIP 2 → ODO

If the fuel level warning light comes on

(see page 3-2), the odometer display

will automatically change to the fuel re-

serve tripmeter mode “TRIP F” and

start counting the distance traveled

from that point. In that case, pushing

the “SELECT” button switches the dis-

play between the various tripmeter and

odometer modes in the following order:

TRIP F → TRIP 1 → TRIP 2 → ODO →

TRIP F

To reset a tripmeter, select it by push-

ing the “SELECT” button, and then

push the “RESET” button. If you do not

reset the fuel reserve tripmeter manual-

ly, it will reset itself automatically and

the display will return to “TRIP 1” after

refueling and traveling 5 km (3 mi).

NOTE:

After resetting the fuel reserve tripme-

ter, the display will return to the prior

mode.

Clock mode

To change the display to the clock

mode, push the “SELECT” button for at

least two seconds.

To change the display back to the

odometer and tripmeter modes, push

the “SELECT” button.

To set the clock:

1. Push both the “SELECT” and “RE-

SET” buttons for at least two sec-

onds.

2. When the hour digits start flashing,

push the “RESET” button to set the

hours.

3. Push the “SELECT” button, and

the minute digits will start flashing.

4. Push the “RESET” button to set

the minutes.

5. Push the “SELECT” button to start

the clock.

NOTE:

After setting the clock, be sure to push

the “SELECT” button before turning the

key to “OFF”, otherwise the clock will

not be set.

Fuel meter

The fuel meter indicates the amount of

fuel in the fuel tank. The display seg-

ments of the fuel meter disappear to-

wards “E” (Empty) as the fuel level

decreases. When the last segment on

the right starts flashing, refuel as soon

as possible. When the key is turned to

“ON”, all of the display segments of the

fuel meter will appear one after the oth-

er and then disappear in order to test

the electrical circuit.

NOTE:

This fuel meter is equipped with a self-

diagnosis system. If the electrical circuit

is defective, all the display segments

will start flashing. If this occurs, have a

Yamaha dealer check the electrical cir-

cuit.

U1D611E0.book Page 4 Thursday, April 28, 2005 1:18 PM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 101 102

Comments to this Manuals

No comments