Yamaha YDRA Operator's Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
CONTROLS
1
2
3
4
5
6
7
8
9
10
11
5-3
JW1
DRIVE SELECT LEVER
The drive select lever is used to shift
the golf car into forward or reverse.
After coming to a complete stop,
move the lever to the desired
position.
Lever Position Car Movement
F FORWARD
R REVERSE
TIP
The back-up buzzer will beep when
the drive select lever is turned to “R.”
ACCELERATOR PEDAL
The accelerator pedal controls the
golf car’s speed.
Action Car Speed
Depress pedal Increase
Release pedal Decrease
å Accelerator pedal
BRAKE PEDAL
Press down on the brake pedal to
stop the golf car.
Brake pedal
Y-920
BEEP
Y-20
A
A
Y-18
Y-21a
B
LIT_19626_11_09:LIT_19626_16_05.qxd 5/19/09 9:34 AM Page 18
1
2
3
4
5
6
7
8
9
10
11
MAINTENANCE
8-4
JW1
Spark Plug Inspection
You should periodically remove and
inspect the spark plug. Dirty or
worn spark plugs can cause poor
performance.
When removing or installing the
spark plug, be careful not to
damage the insulator. A damaged
insulator could allow external
sparks, which could lead to
explosion or fire. Death or serious
personal injury can result from
failing to comply with the safety
instructions in this manual.
å Spark plug
Spark plug cap
1. Check for discoloration and
remove carbon deposits with a
spark plug cleaner or wire
brush. The normal electrode
color will be tan.
2. Check the spark plug type, and
check the spark plug gap with a
feeler gauge.
Standard spark plug:
BPR2ES
Spark plug gap:
0.7
˜
0.8 mm (0.028
˜
0.031 in.)
å Gap
3. Clean the gasket and plug
surfaces and install the spark
plug finger-tight before tightening
to the following torque:
Spark plug torque:
20 Nm, 2.0 m
.
kg
(14.5 ft
.
lb)
Y-516
A
B
A
Y-37
LIT_19626_11_09:LIT_19626_16_05.qxd 5/19/09 9:34 AM Page 31
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Comments to this Manuals

No comments