Yamaha 440 Owner's Manual download pdf (Page 78)

Appendix

Assembling the Clavinova

4. Secure A.

4-1 Secure A from the rear using two short screws

(6 x 16 mm).

4-2 Secure A from the rear using two thin screws

(4 x 14 mm).

4-3 Secure A from the front using four short screws

(6 x 16mm).

4-4 Firmly tighten the screws you temporarily

fastened on B in steps 2-3 above.

5. Connect the speaker cord.

5-1

Remove the twist tie attaching the speaker cord.

5-2 Insert the speaker cord plug into the connector

so that the protruding tab on the plug faces

toward right when viewed from the rear.

6. Connect the pedal cord.

6-1 Insert the pedal cord plug into the [PEDAL]

connector.

6-2 Attach the cord holders to the instrument as

shown, then clip the cord into the holders. At

this time, be careful not to allow too much slack

in the pedal cord between the plug and cord

holder.

7. Attach C.

7-1 Place on D, the stopper-wood in the bottom

corners of C, then attach the top of C.

7-2 Secure upper right and left of C using two thin

screws (4 x 14 mm).

7-3 Secure upper center and bottom of C using five

tapping screws (4 x 20 mm).

4-1

4-2

4-3

4-4

5-2

6-1

6-2

Insert the pedal cord

securely until the metal

part of the cord plug

disappears from view.

Otherwise, the pedal may

not function properly.

7-2

7-3

7-1

1 ... 77 78 79 ... 96

Comments to this Manuals

No comments

Yamaha 440 Owner's Manual Page 78

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha 440