Yamaha 440 Owner's Manual download pdf (Page 36)

Advanced Functions

Recording Your Performance

6. Stop recording.

Press either the [STOP] or [REC] button to stop recording.

When recording is stopped, dashes appear in the display in succession to

indicate that the recorded data is being saved. After the data is saved, “End”

will appear on the display and the Song number will appear. Finally, the

recorded part’s lamp will light in green to indicate that the current Song

now contains data. (Record mode is disengaged automatically.)

NOTICE

Do not turn off the power of the instrument or disconnect the USB storage device, when dashes appear

in the display in succession. Doing so may delete all Song data in the instrument, including external

Songs (page 29).

7. Playing back the recorded performance.

Press the [PLAY/PAUSE] button to play back the recorded performance.

To stop playback, press the [STOP] button.

MIDI recording allows you to record the right and left parts separately.

1. Make all the initial settings.

Refer to steps 1 to 3 in “Quickly recording a performance without

specifying a part” (page 34).

If there is a part that has already been recorded, you can record the other

part while playing this part. To stop playing of the part which is recorded,

press the button for this part to turn off the green lamp.

NOTICE

If the Song contains data, the part lamp lights up in green when you select a Song. Note that recording

new data on this part will erase the existing data.

2. Call up the Record mode.

Press the [REC] button to call up the Record mode.

3. Select a recording part.

Press the [RIGHT] or [LEFT] button so that the lamp of the recording part

flashes in red.

Record mode can be disengaged before recording by pressing either the

[REC] or [STOP] button.

4. Start recording.

Recording will begin automatically as soon as you play a note on the

keyboard. When you wish to record an empty section at the start of the

Song, press the [PLAY/PAUSE] button to start recording.

Recording specific parts of a Performance (MIDI recording)

Part button indications

Off: Contains no data

On (green): Contains data

Flashing (red): Part is enabled

for recording

NOTE

If the memory of the drive is

running out, “Enp” will appear in

the display after pressing the

[REC] button. You can start

recording, but the memory may

become full during recording. We

recommend that you first remove

any unnecessary files (pages 37,

43) to ensure sufficient memory

capacity.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Comments to this Manuals

No comments

Yamaha 440 Owner's Manual Page 36

Comments to this Manuals

Related products and manuals for Digital pianos Yamaha 440