Yamaha TSX-10 Owner's Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
3
English
1 To assure the best performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 To avoid humming sounds, position this system away
from other electrical appliances, motors and
transformers. To prevent fire or electrical shock, do not
place this system where it may get exposed to rain or
any kind of liquid.
3 Avoid extreme temperature fluctuations or excessive use
of a humidifier in the room where this system is
installed to prevent condensation inside this system,
which may cause an electrical shock, fire damage to this
unit, and/or personal injury.
4 In order not to obstruct heat radiation, do not cover the
main unit with a newspaper, a tablecloth, a curtain, etc.
If the temperature inside the main unit rises, it may
cause fire, damage to the main unit and/or personal
injury.
5 Avoid installing this system in a place where foreign
objects and liquid might fall. It might cause a fire,
damage to this system and/or personal injury. Do not
place the following objects on this system:
Other components, as they may cause damage and/or
discolor the surface of this system.
Burning objects (i.e., candles), as they may cause fire,
damage to this system and/or personal injury.
Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this system.
6 Do not use force on switches, controls or connection
cables. Never pull the cables when disconnecting them.
7 Only the voltage specified on the main unit must be
used. Using this system with a higher voltage than
specified is dangerous and may result in fire or other
accidents. YAMAHA will not be held responsible for
any damage resulting from the use of this system with a
voltage other than that specified.
8 Placing the speakers on the same shelf or rack as the
turntable can result in howling.
9 Secure placement or installation is the owner’s
responsibility.
YAMAHA shall not be liable for any accident caused by
improper placement or installation of this system.
10 Any time you note distortion, reduce the volume to a
lower setting. Never allow the amplifier to be driven
into “clipping”. Otherwise the speakers may be
damaged.
11 Do not attempt to clean this system with chemical
solvents; this might damage the finish. Use a clean, dry
cloth.
12 Disconnect the power cord from the wall outlet when
not planning to use this system for a long period of time,
or during an electrical storm, as it could be damaged by
lightning.
13 Do not attempt to modify or fix this system yourself.
Contact qualified YAMAHA service personnel when
any service is needed. The cabinet should never be
opened for any reason.
14 Be sure to read the “Troubleshooting” section regarding
common operating errors before concluding that this
system is faulty.
PRECAUTIONS: READ THIS BEFORE OPERATING THIS SYSTEM
This compact disc
player is classified as a
CLASS 1 LASER
product.
The CLASS 1 LASER
PRODUCT label is
located on the rear
panel.
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described above.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous
if engaged in a live socket outlet.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
The main unit is not disconnected from the AC power
source as long as it is connected to the wall outlet, even
if the unit itself is turned off. This state is called the
standby mode. In this state, the unit is designed to
consume a very small quantity of power.
CAUTION FOR CARRYING THE MAIN UNIT
Before carrying the main unit, first remove the disc
from the unit, press STANDBY/ON to turn the unit
off, then disconnect the AC power plug from the
wall outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
The wires in the mains lead are coloured in accordance
with the following code:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The wire which is coloured BLUE
must be connected to the terminal which is marked
with the letter N or coloured BLACK. The wire which
is coloured BROWN must be connected to the terminal
which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
03/TSX-10E(6.12)b 01.6.12, 4:17 PM3
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 27 28

Comments to this Manuals

No comments