Yamaha TSX-10 Owner's Manual download pdf (Page 11)

English

GETTING STARTED

■ Standing the main unit and/or speakers on a surface

You can stand the main unit and/or the speakers on a hard surface at an angle of 45 degrees or 70 degrees using the

supplied stands.

1 Peel off the seals of the non-slip pads and apply them

to the bottom of the main unit and the stands.

2 Attach the stand to the main unit and/or the speakers

with the screws.

*The standing angle can be selected as 45 or 70

degrees by attaching the stands upside-down.

3 Fine adjustment can be made by sliding the position

of a screw within a rectangular hole so that you can

align the main unit and the speakers.

Note

Change the setting of the remote control sensor switch so that the

main unit can receive the remote control signal properly;

● When the switch is set to the HRIZ position, the sensor A is

active.

● When the switch is set to the OTHER position, the sensor B

is active.

HRIZ OTHER

Main unit

Non-slip pad

Stand

Main unit

Speaker

70 degrees

45 degrees

Remote control sensor switch

04/TSX-10E(6.12)e 01.6.12, 4:17 PM9

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Yamaha TSX-10 Owner's Manual Page 11