Yamaha RX-V781 Owner's Manual download pdf (Page 50)

En 50

Checking the measurement results

You can check the YPAO measurement results.

After the measurement, use the Cursor keys to select

“Result” and press ENTER.

You can also select “Result” from “Auto Setup” (p.109) in the “Setup” menu,

which displays the previous measurement results.

The following screen appears.

a Measurement result items

b Measurement result details

c The number of measured positions (when multi measure is

performed) * RX-V781 only

Use the Cursor keys to select an item.

To finish checking the results and return to the previous

screen, press RETURN.

Reloading the previous YPAO adjustments

When the speaker settings you have configured manually are not

suitable, follow the procedure below to discard the manual settings and

reload the previous YPAO adjustments.

In the “Setup” menu, select “Speaker”, “Auto Setup”,

and then “Result” (p.108).

Use the Cursor keys to select “Setup Reload” and press

ENTER.

To exit from the menu, press ON SCREEN.

Wiring

Polarity of each speaker

Reverse: The speaker cable may be connected with the

reverse polarity (+/-).

Size

Size of each speaker (cross-over frequency of the

subwoofer)

Large: The speaker can reproduce low-frequency signals

effectively.

Small: The speaker cannot reproduce low-frequency

signals effectively.

Distance Distance from the listening position to each speaker

Level Output level adjustment for each speaker

ON SCREEN

ENTER

RETURN

Cursor keys

1 ... 49 50 51 ... 155

No comments

Yamaha RX-V781 Owner's Manual Page 50