Yamaha RX-V781 Owner's Manual download pdf (Page 49)

En 49

When the measurements at the positions you want to

measure are completed, use the Cursor keys to select

“CANCEL” and press ENTER.

When you have taken measurements at 8 listening positions, the

following screen appears automatically.

To check the measurement results, select “Result”. For details, see “Checking

the measurement results” (p.50).

Use the Cursor keys to select “Save/Cancel” and press

ENTER.

To save the measurement result, use the Cursor keys to

select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

To finish the measurement without saving the result, select “CANCEL”.

Use the Cursor keys (e/r) to select “YES” or “NO” to

enable/disable YPAO Volume and press ENTER.

• If YPAO Volume is enabled, the high- and low-frequency levels are

automatically adjusted according to the volume so that you can enjoy natural

sounds even at low volume.

• You can also enable/disable YPAO Volume in “YPAO Volume” (p.98) in the

“Option” menu.

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

Caution

• The YPAO microphone is sensitive to heat, so should not be placed anywhere

where it could be exposed to direct sunlight or high temperatures (such as on

top of AV equipment).

ENTER

Cursor keys

1 ... 48 49 50 ... 155

No comments

Yamaha RX-V781 Owner's Manual Page 49