Yamaha RX-V1800 Manual download pdf (Page 85)

81 En

Customizing this unit (MANUAL SETUP)

ADVANCED

OPERATION

English

Surround left/right speakers SUR. L/R SP

Choices: NONE, SMALL, LARGE

When the surround speakers are large:

Select “LARGE” (large).

When the surround speakers are small:

Select “SMALL” (small).

When you do not use the surround speakers:

Select “NONE” (none). This unit is set to the Virtual

CINEMA DSP mode (see page 51), and “SUR.B L/R

SP” is automatically set to “NONE”.

See page 17 for the connection information of the surround

back speakers.

Surround back left/right speakers

SUR.B L/R SP

Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2

When the surround back left and right

speakers are large:

Select “LRGx2” (large x 2).

When the single surround back speaker is

large:

Select “LRGx1” (large x 1).

When the surround back left and right

speakers are small:

Select “SMLx2” (small x 2).

When the single surround back speaker is

small:

Select “SMLx1” (small x 1).

When you do not use the surround back

speakers:

Select “NONE” (none). The surround back channel

signals are directed to the surround left and right

speakers.

See page 17 for the connection information of the surround

back speakers.

If the Dolby TrueHD audio signals are input and “SUR.B L/R

SP” is set to “NONE”, the left and right surround back

channels are not directed to the surround left and right

speakers.

Presence speakers PRESENCE SP

Use this feature if you want to use the presence speakers

connected to this unit.

Choices: NONE, YES

When you do not use the presence speakers:

Select “NONE” (none).

When you use the presence speakers:

Select “YES” (yes).

“DIALOG LIFT” is available only when “PRESENCE SP” is set

to “YES”.

Bass cross over CROSS OVER

Use this feature to select the crossover frequency of all the

speakers set to “SML” (or “SMALL”) or to “NONE” in

“SPEAKER SET” (see page 80). All frequencies below

the selected frequency will be sent to the subwoofer or to

the speakers set to “LRG” (or “LARGE”) in “SPEAKER

SET” (see page 80).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

If your subwoofer can adjust the output volume and the crossover

frequency, set the volume to about half way (or slightly less) and

set the crossover frequency to the maximum.

Measure for the speaker size

The woofer section of a speaker is

– 16 cm (6.5 in) or larger: large

– smaller than 16 cm (6.5 in): small

A)SPEAKER SET

SUR. L/R SP

NONE >SMALL LARGE

A)SPEAKER SET

SUR.B L/R SP

NONE SMLx1 >SMLx2

Note

A)SPEAKER SET

PRESENCE SP

NONE >YES

A)SPEAKER SET

CROSS OVER

FREQ;;;;80Hz

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 156 157

Comments to this Manuals

No comments

Yamaha RX-V1800 Manual Page 85

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1800