Yamaha HTR-7063 Owner's Manual download pdf (Page 87)

SETUP

Setting various functions (Setup menu)

En 87

■

Receiver operation via TV (HDMI Control)

HDMI Control

Set the HDMI Control function to “On” to operate devices

connected via HDMI. If the TV or other external components

support HDMI Control (e.g., Panasonic VIERA Link), you can use

the remote controls of those devices to operate some of this unit’s

functions, and to synchronize this unit with the operation of those

devices.

Refer to “Using the HDMI Control function” (☞

p. 100) for setting

instructions.

■

Selecting an HDMI OUT jack for the HDMI

Control function

Control Select

Select the HDMI OUT jack that utilizes the HDMI Control

function.

Refer to “Using the HDMI Control function” (☞

p. 100) for setting

instructions.

■

Listening to TV audio via single HDMI

cable (Audio Return Channel)

ARC (Audio Return Channel)

You can enable or disable the Audio Return Channel function.

When using a TV that supports Audio Return Channel function and

the function is enabled, the TV’s audio output is transmit to this

unit via an HDMI cable.

The TV audio input to this unit is regarded as the input source

selected in “TV Audio Input.” J2

By means of this function, you do not need to connect the TV’s

audio output (digital audio output or analog audio output) to the

unit.

When the TV audio is input to the unit using Audio Return

Channel, “TV” is displayed on the front panel display.

■

Selecting an input source to assign audio

input for the TV

TV Audio Input

Select the input source that receives audio signals from TV while

the HDMI Control function is on.

When using a TV that supports Audio Return Channel function and

the function is enabled, the audio input for the TV is assigned to

the input source selected here. J2

TV1

TV2

Off (Default) Sets HDMI Control to “Off.”

On Sets HDMI Control to “On.” J1

If this unit is connected to HDMI devices that do not support the

HDMI Control function, these functions will not operate.

Out1(TV1) Applies the HDMI Control function for the HDMI

OUT 1 jack.

Out2(TV2) Applies the HDMI Control function for the HDMI

OUT 2 jack.

Off (Default) Sets the Audio Return Channel to “Off.”

On Sets the Audio Return Channel to “On.”

• “ARC (Audio Return Channel)” is enabled only for the HDMI

OUT 1 or 2 jack selected with “Control Select.”

• Refer to “Single HDMI cable input to TV audio with Audio

Return Channel function” (☞

p. 102) for setting instructions.

SL SR

SBL SBR

AV4

VOL.

Audio input AV1-6 or AUDIO1-2

Default setting AV 4

Audio input AV1-6 or AUDIO1-2

Default setting AV 1

• “TV Audio Input” is enabled only for the HDMI OUT 1 or 2 jack

selected with “Control Select.”

• Refer to “Switching the input source on this unit automatically

when listening to TV audio” (☞

p. 101) for instructions.

1 : When the HDMI Control is “On,” the Standby Through function is

automatically enabled. When this unit enters standby mode, the audio and

video signals from the last-selected HDMI input source will continue to be

transmitted to the TV. The HDMI input source can only be changed using the

remote control.

2 : While the Audio Return Channel function is on, the jack selected for the input

source cannot be used.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 128 129

Comments to this Manuals

No comments

Yamaha HTR-7063 Owner's Manual Page 87

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-7063