Yamaha HTR-7063 Owner's Manual download pdf (Page 107)

En 107

APPENDIX

Troubleshooting

No picture. The video signal output from this

unit is not supported by a monitor

connected to this unit via the

HDMI OUT 1-2 jacks.

Displays the Advanced Setup menu and

select “VIDEO” in “INIT” to reset the video

parameters.

Displays the Advanced Setup menu and set

“MON.CHK” to “YES.”

An appropriate video input is not

selected on the TV.

Select an appropriate video input on the TV. —

No sound is output

from a specific

speaker.

The speaker is malfunctioning.

Check the Speaker indicators on

the front panel display. If the

corresponding indicator lights up,

connect another speaker and check

if sound is output.

If sound is not output, the unit may be

malfunctioning.

The playback component or

speakers are not connected

properly.

Connect the cables properly. If the problem

persists, the cables may be defective.

19, 25

Output from that speaker is

disabled.

Check the Speaker indicators on the front

panel display. If the corresponding indicator

is turned off, try the following.

1) Change to a different input source.

2) With the selected sound program, sound

is not output from that speaker. Select

another sound program.

3) “None” may have been selected for that

speaker on this unit. Display “Speaker” in

the Setup menu, and set respective

parameters to enable output from that

speaker (“Speaker” → “Manual Setup” →

“Configuration”).

10, 80

The volume of that speaker is set

to the minimum in “Speaker” in

the Setup menu.

Display “Speaker” in the Setup menu and

adjust the volume (“Speaker” → “Manual

Setup” → “Level”).

(If hardly any sound comes from

one channel)

Speaker output balance is not set

correctly.

Balance the volume of each speaker from

“Level” in the Setup menu (“Speaker” →

“Manual Setup” → “Level”).

Sound may not be output from

certain channels, depending on the

input source or sound program.

Try another sound program. 43

Problem Cause Remedy

See

page

Only the center

speaker outputs

substantial sound.

When a monaural source sound

program is applied, for some

surround decoders, sound from all

channels is output from the center

speaker.

Try another sound program. 43

No sound is heard

from the presence

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press STRAIGHT to exit straight decoding

mode.

Sound may not be output from

certain channels depending on

input sources or sound programs.

Try another sound program. 43

No sound is heard

from the surround

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press STRAIGHT to exit straight decoding

mode.

Sound may not be output from

certain channels depending on

input sources or sound programs.

Try another sound program. 43

No sound is heard

from the surround

back speakers.

“Extended Surround” in the

OPTION menu is set to “OFF,” or

an input signal does not contain a

surround back flag with “Extended

Surround” set to “Auto.”

Set “Extended Surround” other than “OFF”

or “Auto.”

No sound is heard

from the subwoofer.

A subwoofer is not connected, or it

is inactive.

Check that a subwoofer is connected

correctly, and from the Setup menu

“Subwoofer” (“Speaker” → “Manual

Setup” → “Configuration” →

“Subwoofer”), set the subwoofer to “Use.”

20, 82

The subwoofer is turned off. Turn the subwoofer power on.

If the subwoofer includes an Auto Power

Off function, then lower the Auto Power Off

sensitivity settings.

—

The source does not contain LFE

(☞p. 113) or low frequency

signals.

—

The right

combination of audio

/ video jacks to

connect cannot be

found.

Combine input connected to the

external component video output

with another input audio jack.

Display the Input menu for the connected

video output, select “Audio In” and select

the jack to use for audio input.

Problem Cause Remedy

See

page

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 128 129

Comments to this Manuals

No comments

Yamaha HTR-7063 Owner's Manual Page 107

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-7063