Yamaha HTR-7063 Owner's Manual download pdf (Page 40)

CONNECTIONS

Setting up the speaker parameters automatically (YPAO)

En 40

W-1:

Out of Phase

The speakers displayed

are connected with the

opposite polarity.

Depending on the type of

speakers you are using

and the environment in

which you have them

installed, this message

may occur even if the

speakers are connected

correctly.

Depending on the type of

speakers, “W-1” may

display even if the

speakers are connected

correctly.

Check that the speaker

polarity + (positive), and

- (negative) are correct. If

these are connected

correctly, you can use the

speakers normally even

this message appears.

W-2:

Over 24m/80ft

The speakers displayed

are separated from the

listening position by

more than 24 m, and

cannot be adjusted

correctly.

Install the speakers with

24 m of the listening

position.

W-3:

Level Error

Volume level varies

greatly for individual

channels, and cannot be

adjusted correctly.

Check that all speakers

are installed in the same

surroundings.

Check that the speaker

polarity + (positive), and

- (negative) are correct.

We recommend the same

speakers or speakers with

as similar specifications

as possible.

Adjust the volume of the

subwoofer.

If “W-2” or “W-3” appears, you can apply measurement results,

but they will not give optimal results. We recommend that you

resolve the problem and carry out the measurement process

again.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 128 129

Comments to this Manuals

No comments

Yamaha HTR-7063 Owner's Manual Page 40

Comments to this Manuals

Related products and manuals for AV receivers Yamaha HTR-7063