Yamaha RP-U100 Manual download pdf (Page 53)

Opening Page 24/68 ページ

AUX1 Mode

AUX2 Mode

USB

This position serves for playing back a digital audio signal from the

computer supplied to the RP-U100 via the USB link.

To use this position, the USB cable must be connected between

the PC and the RP-U100, and appropriate settings must be made

on the computer to output the audio signal.

USB connection details

DIGITAL

This position serves for playing back a digital audio signal from the

computer supplied to the RP-U100 via the digital input jacks.

Both optical and coaxial jacks are provided. The RP-U100

performs automatic switching by hardware, giving priority to the

optical input.

ANALOG

This position serves for playing back an analog audio signal from the

computer supplied to the RP-U100 via the analog input jacks.

The USB capture function is not available in PC input mode.

USB capture details

AUX1 Mode

AUX1 mode

This mode serves for playing back the external input signal. There are digital (optical)

and analog signal input jacks. Automatic switching gives priority to digital signals.

USB Capture

In AUX1 mode, the signal that will be recorded by USB capture is the signal input

from the AUX1 - ANALOG input jacks on the main unit. If AUX1 - DIGITAL was

selected, the RP-U100 will automatically switch over to AUX1 - ANALOG.

Also when the USB MIX LEVEL setting is active, the mixed signal from a computer

connected with the USB cable cannot be captured.

USB capture details

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 96 97

No comments

Yamaha RP-U100 Manual Page 53