Yamaha Tyros4 User Manual download pdf

FAQ

Overall

A click or pop is heard when the power is turned on or off. This is normal. Electrical current is being applied to the instrument.

Some Voices have a looping sound. This is normal and is a result of the instrument’s sampling system.

Some noise or vibrato is noticeable at higher pitches, depending

upon the Voice.

The overall volume is too low, or, no sound is heard. The master volume may be set too low. Set it to an appropriate level

with the [MASTER VOLUME] control.

All keyboard parts are set to off. Use the PART ON/OFF [RIGHT 1]/

[RIGHT 2]/[RIGHT 3]/[LEFT] button to turn it on.

The volume of individual parts may be set too low. Raise the volume

in the BALANCE display.

Make sure the desired channel is set to on in the CHANNEL display.

Headphones are connected, disabling the speaker output. Unplug

the headphones.

If volume control is assigned to the [ASSIGN] slider or foot controller,

set it to an appropriate level.

The [FADE IN/OUT] button is on, muting the sound. Press the [FADE

IN/OUT] button to turn the function off.

A plug is inserted in the LOOP SEND jacks. Unplug the LOOP SEND

jacks.

Connect the footswitch to the appropriate jack.

Check whether the external speaker is connected and the volume

control is adjusted properly.

The keyboard volume is lower than the Style/ Song playback

volume.

The volume of the keyboard parts may be set too low. Raise the

volume in the BALANCE display.

The [ASSIGN] slider may be set to a low level. (By default, keyboard

volume is assigned to the [ASSIGN] slider.) Set it to an appropriate

level.

The Main display does not appear even when turning the power on.

This may occur if a USB storage device has been installed to the

instrument. Installation of some USB storage devices may result a

long interval between turning the power on and appearance of the

Main display. To avoid this, turn the power on after disconnecting the

device.

Some characters of the file/folder name are garbled. The language settings have been changed. Set the appropriate

language for the file/ folder name.

An existing file is not shown. • The file extension (.MID, etc.) may have been changed or deleted.

Manually rename the file, adding the appropriate extension, on a

computer.

• Data files with names of more than 50 characters cannot be

handled by the instrument. Rename the file, reducing the number of

characters to 50 or less.

The Premium Pack data cannot be purchased. Before purchasing the Premium Pack data, obtain the license key.

Voice

What is Super Articulation! Voice? The SA Voices provide greater playability and expressive control in

real time. For example, with the Saxophone Voice, if you play a C and

then a D in a legato manner, you will hear the note change

seamlessly, as though a saxophone player played it in a single

breath. Similarly with the Concert Guitar Voice, the D note would

sound as a “hammer on”, without the string being plucked again.

Depending on how you play, other effects such as shake or breath

noises (for the Trumpet Voice), or finger noises (for the Guitar Voice)

will be produced.

1 2 3 4 5

Summary of Contents

Page 1

1FAQOverallA click or pop is heard when the power is turned on or off. This is normal. Electrical current is being applied to the instrument.Some Voic

Page 2 - ♭ above, you’ll

2What is Super Articulation 2! Voice? Mainly for wind instrument Voices, a special technology developed by Yamaha, called AEM has been used. SA2! Soun

Page 3

3When playing back a Song, some channels do not play. Playback of these channels may be set to off.• Turn playback on for those channels that are set

Page 4 - Music Finder

4Vocal HarmonyHow to use Vocal Harmony 1. Connect a microphone to the Tyros4, then adjust the [MIC GAIN] while singing into the microphone2. From the

Page 5 - Terminal

5One Touch SettingHow to use One Touch Setting 1. Select a Style2. Press one of the ONE TOUCH SETTING [1]–[4] buttonsNot only does this instantly call