Yamaha MDF3 Owner's Manual download pdf (Page 36)

36

4.

Prepare the receiving device.

Prepare your keyboard or tone genera-

tor to receive the sequence data. The

preparations to be made vary depend-

ing on the instrument, but may include

the selection of MIDI channels and sound

programs, the adjustment of pitch bend

and modulation ranges, and so on. Re-

fer to the appropriate operation manual

to check the correct procedure.

5.

Start the playback.

Press the START/STOP key. The MDF3

will begin to play back the sequence data

file you’ve selected. While the file is play-

ing, the LCD will indicate the elapsed

performance time.

Note:

When you press the START/STOP key,

the MDF3 will hesitate for 1 – 15 seconds as

it reads data from the disk before it begins to

play back the data. If you need to start the

playback with greater accuracy, press the

PAUSE key immediately after pressing the

START/STOP key and wait until the START/

STOP LED lights. The MDF3 will begin play-

ing the file as soon as you press the PAUSE

key a second time or press the foot switch if

it is connected.

6.

Change the tempo.

You can use the FILE DATA keys to

change the playback tempo while the file

is playing. When you press one of the

FILE DATA keys, the following display

will appear.

Note:

Sequence data files created by devices

other than the MDF3 may include tempo

change data that will alter the tempo regard-

less of the changes you make using the FILE

DATA keys. Since the playback tempo is com-

monly recorded at the beginning of a file, you

may find that the tempo will return to its origi-

nal value if you play a file from the top after

changing the tempo using the FILE DATA

keys.

SONGå01~~~~œ=120

file name tempo

SONGå01~~~~00:34

file name performance time

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Comments to this Manuals

No comments